Spigen Glas.tR EZ Fit Screenprotector compatibel met Galaxy S21, met sjabloon voor installatie, Case friendly, 9H gehard glas

Very good quality.

Er zaten 2 glaasjes in de verpakking. Installatie ging de eerste keer gelijk goed (kan eigenlijk niet fout gaan).Glas is case-friendly in combinatie met mn otterbox strada. Minder als 1mm speling tussen de rand en het glas.

Ik heb nooit eerder een screenprotector gehad die zo makkelijk perfect aan te brengen was. Maar wat een materiaalverspilling zeg. De aanbrenghulp bevat meer materiaal dan het gemiddelde telefoonhoesje. En dat gooi je dus na 1x gebruik weg. Misschien dat er nog een leuk hergebruikprojectje mee te doen is. Ombouwen tot telefoonhouder of zoiets.

Fingerprint sensor does not work on Galaxy S21. Otherwise no problems using the phone.Screen protector also covers the lens of the selfie camera (instead of having a small hole to keep it uncovered). That might be a problem if the optical quality of the screen protector is less than the lens of the Galaxy S21.Perfect fit for use with Spigen tough armour case.

De installatie is zeer eenvoudig, het display moet goed schoongemaakt worden net de bijgeleverde materialen en daarna wordt het frame over de telefoon geplaatst. De protector wordt perfekt uitgelijnd en zit recht.Enige nadeel wat ik heb ondervonden is dat de fingerprint sensor aanzienlijk minder gevoelig is, ook na het opnieuw inleren ervan.

The template works very well, i managed to get all the air bubbels out. And after reconfiguring my fingerprints the fingerprint scanner also worked very well.

Works perfect

Wow! Detta är nog det bästa som har hänt skärmskydd! Så snabbt och enkelt det gick att montera Skärmskyddet utan att misslyckas!Perfekt passform!Bara+ här!PS: Se till att torka av din framkamera ordentligt för skärmskyddet har inget utskuret hål för kameran utan hela framkameran täcks av skyddet.

UPDATE - SAVED MY NEW PHONE! I dropped my phone 4ft onto the pavement today and it landed face down on a small sharp stone (of course!). The stone left a hole in the screen protector and lots of cracks. I thought the screen would be damaged for sure, and peeled off the protector expecting the worst. It had fallen with such force and the protector was trashed. But the screen underneath was completely undamaged! I've now fitted the second one, and will be buying another set to keep for next time I do something stupid...I've used dozens of screen protectors over the years, both glass and film type. I'd gotten pretty good at installing the glass ones bubble free but it's still a faff. Couldn't believe how easy this made it - perfectly installed, no bubbles, completely hassle free. Simply clean your phone screen, peel the backing film off the glass and clip the plastic guide down over your phone (make sure there's no case on!). Then slide your finger up and down the channel for 30 seconds as directed on the sticker, which secures the glass to your screen. Peel off the channel sticker (from the bottom as directed), unclip the plastic guide from your phone and then peel off the front film on the glass - finished! I used the included squeegee to make sure it was well stuck around the edges, but there were no bubbles to remove. Took less than a minute to install. A tip is to install it in front of a window, so the light falls on your screen. Makes it easy to see it there's any dust. The included wipes, cloth and dust stickers work well. The trick is to work in a clean dust free area like your bathroom or kitchen. Nowhere with soft furnishings. Having a fan blowing or the hose off your vacuum cleaner set next to the phone stops any dust settling on the screen in the few seconds it takes to peel the backing off the glass and clip the guide on (don't do this until you're ready and work quickly).I've had no issues with the fingerprint reader on my S21. I can only assume people having issues forgot to remove the factory installed plastic screen protector - not the obvious delivery protection, but the 'proper' screen protector they've installed. You can see where this is cut away around the camera - you need to catch the corner with your nail and peel it off. The screen feels so much better with the glass protector - I had to use my phone for a day before installing this (waiting for delivery) and the factory fitted one was awful. Full of dust and fingerprints. The glass ones are much smoother to use, and no cut out around the camera. If Samsung are going to the trouble of installing screen protectors in the factory, I don't know why they can't just use glass ones!As a bonus this was a pack of two, so I have a spare if this one gets damaged. Also works fine with my Spigen case as it sightly smaller than the screen.

Easy to install, easy to remove bubbles. Just follow the simple guide

C'est la seconde fois que je le commande pour mon Samsung Galaxy S21 car il est parfait ! Très facile à installer et avec la "coque" pour l'installer pas de souci de positionnement, la vitre se met automatiquement pile au bon endroit. Très solide (la 1ère que j'avais installée a duré 2 ans malgré de nombreux chocs et chutes du téléphone. La boîte contient tout les petits accessoires utiles pour la mise en place propre et facile et sans aucune bulles d'air. Peut être un peu plus cher que d'autres mais très bon investissement sur le long terme : je recommande vivement !

Ever since the pre-applied screen protector started getting micro scratches I started looking for a good screen protector that doesn't break the fingerprint reader. I then bought one of those flexible gel type screen protector and the fingerprint worked absolutely perfectly but that screen protector needs some taking care of and it keeps lifting from the edges. The touch wasn't smooth as glass and would cause friction. Finally took the risk and bought this Spigen TGSP. Fingerprint had to be re-registered and it works fine although a tad bit slower which I'm absolutely fine with since I don't have to baby it like the previous gel type. The oleophobic coating is very nice too. Should've bought this long ago!