Winkelwagen is nog leeg.
Winkelwagen is nog leeg.Productbeschrijving
Deze CNC-kit bevat:
* 1 x digitale stappenmotor 1.0-4.2A 20-50VDC voor Nema 17, 23, 24 stappenmotor.
* 1 x Nema 23 Bipolar 3Nm (425oz.in) 3,5A 57x57x114mm 4 draden CNC stappenmotor
Motorspecificatie
*Onderdeelnummer fabrikant: 23HS45-4204S.
* Motortype: bipolar
* Stappenhoek: 1.8 graden
* Houddraaimoment: 3 Nm.
* Nominale stroom / fase: 4,2 A.
* Faseweerstand: 0,9 ohms
* Inductie: 3,8 mH ± 20% (1 KHz)
* Framegrootte: 57 x 57 mm.
* Lichaamslengte: 113 mm.
* Schachtdiameter: Φ10mm
* Schachtlengte: 24 mm.
* D-snijlengte: 20 mm.
* Aantal leads: 4.
* Kabellengte: 400 mm.
*Gewicht: 1,8 kg.
Driverspecificatie
* Ingangsspanning 20-50VDC
* Anti-resonantie biedt een optimaal koppel en nullen in het middelste gedeelte.
* Motor-auto-identificatie en parameterauto-configuratie bij het inschakelen bieden optimale reacties met verschillende motoren.
* Multi-stepping maakt een lage resolutie trapinvoer mogelijk om een hogere microstap-output te genereren en biedt daardoor een soepelere motorbeweging.
* 15 selecteerbare microstapresoluties inclusief 400, 800, 1600, 3200, 6400, 12800, 25600, 1000, 2000, 4000, 5000, 8000, 10000, 20000, 25000.
* Soft-start met geen "jump" wanneer hij wordt ingeschakeld.
*8 selecteerbare piekstroom inclusief 1,00 A, 1,46 A, 1,91 A, 2,37 A, 2,84 A, 3,31 A, 3,76 A, 4,20 A.
* Pulse-ingangsfrequentie tot 200 kHz, TTL compatibele en optisch geïsoleerde ingang.
* Automatische stationaire stroomreductie.
* Geschikt voor 2-fasen en 4-fasen-motoren.
* Ondersteuning PUL/DIR-modus
*Overspannings- en overstroombeveiliging
José M.
29 juni 2025
MUITO BOM5 ESTRELAS
NicMar
10 juni 2025
Ha una forza eccezionale ed è molto silenzioso. Soddisfatto
Mark the Consumer
12 maart 2025
I have replaced my micro-stepper drivers many times and have never had one that just doesn't work with my CO2 laser engraver controller. Nothing nota no buzz nothing. I'm sure it's not compatible with my systems Rudia controller but not sure why.
Phillip Vogel
7 maart 2025
I've been doing control systems for a long, long time and I got this kit to help me model a system in my shop. I'm pretty impressed. There's not much to say about it, it just works. On the plus side, the step, direction and enable inputs are optically isolated, which is good for system reliability and for flexibility. They bring out both sides (cathode and anode) of the optos, so if your signal polarity is backwards, you can just reverse the wires. There is plenty of flexibility in step sizes from one to 51,200 pulses per step. The output current regulation is adjustable from 0.75 to 4.5 amps, The terminal strips are pluggable so you can replace the drive easily, if need be. One thing I would have liked is separate terminal blocks for the motor, motor power, logic power and control signals. It would make things slightly easier on assembly. I'm pretty sure that these terminals are stackable, so just swapping the plugs out for smaller ones should be simple.The motor is great. It's a big, honkin' Nema 23. About twice the length of most, and it shows in the tourque. The system I bought this for has the motor swinging a foot-long piece of 1" square iron tube, and it does it with no problem, and surprisingly fast.The only thing missing from this kit is a motor mounting bracket. Those are available from Amazon, but it would have been nice to have it included. I will absolutely buy more of these as my needs arise.
Customer
19 januari 2025
This was a good upgrade to my cnc Z axis. The current spindle and assembly weighs about 4kg. This motor moves it with ease and without generating too much heat during larger jobs.
Aanbevolen producten
Misschien vind je dit ook leuk
Aanbieding
12,99€
24,99€