Winkelwagentje

Winkelwagen is nog leeg.

Winkelwagen is nog leeg.
Op voorraad

Stoppwerk deurstopper vloer tot schroef - vaste vloerstopper RVS met stevige schroefverankering - vloerbevestiging - Ø 3,5cm hoogte: 4cm

7,99€ 14,99€
Gratis verzending bij bestellingen boven 25,99€

Productdetails

  • PERFECTE BESCHERMING : De TS012 deurbuffer voor de vloermontage van Stoppwerk in roestvrij staal beschermt uw muur en deur op betrouwbare wijze tegen lelijke krassen en deuken door het zachte rubber.
  • EASY ASSEMBLY: Dankzij de volledig meegeleverde montageaccessoires (bevestigingsschroef + deuvel) en de eenvoudig te begrijpen montage-instructies kan de deurstop eenvoudig worden vastgezet.
  • HOGE WAARDE KWALITEIT: De speciale materiaalkeuze, gecombineerd met de hoge kwaliteitseisen van Stoppwerk, garandeert dat u lang plezier heeft van deze rubberbuffer.
  • MODERN DESIGN: De bijzondere uitstraling maakt de wandbescherming tot een echte blikvanger. De afmetingen van 3,5 x 3,5 x 4cm zijn ideaal. Door de zware schroef houdt hij hem extreem stevig vast aan de vloer.
  • MULTIPELE TOEPASSING: De bevestiging laat het gebruik toe op hout, beton en andere materialen. Onze permanent geïnstalleerde stopper houdt stand, zelfs als de deur hard aankomt.


Productbeschrijving

Onze deurbumper kenmerkt zich met name door het roestvrijstalen ontwerp, dat is ontworpen voor een eenvoudige bediening. Na montage op de vloer worden deuken in de muur en krassen op de deurkruk in de toekomst voorkomen.
De muurbuffer is zo ontworpen dat de dikte van het bijzonder zachte rubber voldoende is om zowel de deur als de muur te beschermen tegen beschadiging. Zoals u ziet is er echter minstens zoveel waarde gehecht aan het ontwerp van deze wanddeurstopper.

Uw voordelen
- hoogwaardige rubberen buffer beschermt deur en muur permanent tegen beschadiging - eenvoudige
installatie met de meegeleverde montageaccessoires - schroef en deuvel zijn al bij deze wandbeschermer inbegrepen - gedetailleerde, geïllustreerde
instructies plus extra video-instructies - dus ook geschikt voor lekenDe deurbuffer kan eenvoudig worden bevestigd -
massief roestvrij staal -
voorkomt lelijke krassen en deuken in uw muur - optimale
afmeting van 3,5 x 3,5 x 4 cm Installatie De deurbuffer wordt op
de gewenste afstand van de muur aan de

vloer bevestigd. Het benodigde montagemateriaal voor de vloerdeurstop is al bij het product inbegrepen en belooft een snelle en eenvoudige installatie. Nadat het benodigde gat is geboord, kan de deurstopper eenvoudig worden vastgeschroefd.

Ons doel: Een product dat overtuigt en voldoet aan uw verwachtingen. Om dit te bereiken stellen we strenge eisen aan de veiligheid, de functionaliteit, het materiaal en de verwerking van de producten.

Klik nu op IN HET SCHOONMAAK! En gebruik gewoon de stop om lelijke krassen op uw deuren en muren in huis te voorkomen.


JC
7 juli 2025
Acheté pour remplacer un vieux truc des années 60 en bout de course. Il faut une bonne machine pour percer le sol. Mais sinon c’est top
Black Tulip
30 juni 2025
Prodotto eccellente, acciaio inox massiccio, filettato all’interno per tassello a vite M8 in metallo robusto e fornito a corredo. Ideale per resistere ad urti di porte pesanti. Design molto bello.
Edward Holmes
24 december 2024
I purchased two of these door stops and although I'm only using them with lightweight internal doors, was very pleased with how study they are. I imagine that they would be suitable for much heavier doors. It's worth noting, that they are supplied with an anchor bolt and this type of fixing is only suitable for solid floors (but the instructions show that it can be fitted using a screw and wall plug if required).The video, linked to in the instructions, is in German (without English subtitles) and it doesn't actually show fitting the door stop. So, I fitted it as follows:1. Drilled a 12mm hole to a depth slightly longer than the sleeved portion of the anchor bolt, such that the sleeve was flush with the floor surface.2. To ensure that the anchor bolt worked correctly, I used a vacuum to clean out any debris from the hole.3. Tapped the anchor bolt, to make sure that it was at the bottom of the hole, before placing the flat washer, followed by the spring washer and the nut.4. Tightened the nut using a 17mm ring spanner, whilst gripping the threaded portion of the bolt (to stop it rotating), until the spring washer provided enough tension.5. When the nut was tight, I removed it along with the washers, before screwing the door stop in place (both portions). No tools were needed for this, as it can be tightened sufficiently by hand (by gripping the rubber portion).Overall I'm very happy with the result and they both look very stylish. Plus, they match the styling of the wall mounted door stop TS010 (also sold by stoppwerk).
Gottfried Rieck
10 december 2024
Einfach günstig
Jon
27 november 2024
Perfecto y elegante. Facilisimo de instalar