TAKPART Universele pijpconnector met dubbele uitlaatpijpklem, diameter 50 x 125 mm

- Walker catalog says this is a 50mm clamp, not specific to CruzeWarning. The spec for all these 2.0" and 50mm double band clamps are for 2" OD pipes. They will not accept pipes bigger than 2" OD. We tried all of them for 2" ID pipes, which measures slightly less than 2 1/8" OD. The band clamps will not fit. At their widest loosed position, they are meant for maximum 2" OD pipes. You can get away with 1 7/8" ID, but that is about it. These bands clamp from a max 2" OD to roughly 1.5"/1.6" OD.

Awesome clamp!

Schnelle Lösung zur Auspuffreparatur. Der TÜV hat es abgenommen. Selber eingebaut.

Artículo muy práctico y aligera el trabajo de la unión del tubo de escape lo recomiendo muy bueno buena calidad

Gauging size was tricky, one side (cat) was 55mm with the flange, centre pipe was 50mm. Started with the 55mm, but this wouldn't reduce down enough for 50mm, so bought the 50mm, but this wouldn't open up enough to get over the flange.Easiest solution, just use both 55mm lapping over the 50mm. Jobs a good un.A lot easier and cleaner than using an exhaust bandage and lots of gum. Still used some gun gum to create a seal.