Winkelwagen is nog leeg.
Winkelwagen is nog leeg.Martian Invader
13 juli 2025
I have had a problem with the AV2 and my Panasonic cameras.Using the audio Timecode input to the camera from the 3.5mm TC out of the AV2 ( set on "mic" option ) overloads the Panasonic pre-amps, even set to their lowest gain of -12 dB.it is 50mV p-p ( 17.6 mV rms ) and this is too high for the preamps in Panasonic mirrorless cameras.I don't know if this is just a faulty unit or a firmware issue, but if you want Timecode audio input to a camera you should check if you have this issue also.I have returned this unit and the Bluetooth adapter for this reason.Update :I have been in contact with Tascam about this issue and they suggest using an attenuation cable as they cannot reduce the TC output with a firmware update. I consider this unsatisfactory as this is an additional cost and shouldn't be necessary.
Customer
27 mei 2025
F3 ses kayıt kalitesinden daha iyi, timecode vs. ekstra özellikleriyle çok daha işlevsel
john lee
7 december 2024
Used it on several videos shoots and works great
danilo
28 november 2024
provato perfetto ok.eccellente prodotto
Malte Frischmuth
13 november 2024
Ich finde den Tascam FR-AV2 sehr gut aufgebaut.Sehr gut klingende Preamps; Die interne M/S Matrix funktioniert auch sehr gut.Interner Timecode ist bei so einem kleinen Gerät eine Besonderheit.(Ich mache professionelle Feldaufnahmen mit Schoeps und Sennheiser Mikrofonen)All das ist besser als bei dem Zoom F3 , den ich bisher hauptsächlich als portablenRecorder benutzt habe.Die Menüs des Tascam FR-AV2 sind etwas umständlicher, als beim Zoom F3.Ich finde es etwas schade , dass man nicht in seine DAW (Cubase, Samplitude etc.)per "USB" die beiden aktivierten 48V Mic-Preamps des Tascam FR-AV2 aufnehmen kann (in 32 Bit float.) - und gleichzeitig die anderen Spuren der DAW abhören kann. (mit allen VST Effekten etc.).Dies ist mit dem Zoom F3 ohne Probleme möglich (auch mit sehr geringer Latenz) und man kann diese Funktion per "Live-Monitoring" an und ausschalten.Somit ist der Tascam nur ein Recorder aber kein vollwertiges kleines USB-Interface. Wenn ich auf "USB" Modus umschalte , um die DAW abzuhören , sind alle möglichen Funktionen deaktiviert, wie "48V" etc. - es wäre sehr nützlich , wenn es eine Funktion wie "USB + *48V Preamps activ*" gäbe.So werde ich weiterhin viel mit dem Zoom F3 (als portablen Recorder+USB Interface) arbeiten und den Tascam FR-AV2 (eher reiner portabler Recorder) vor Allem wegen der präzisen Timcode-Funktionen als reinen Audio-Recorder für Direkte Stereo-Spur Aufnahmen für Videoaufnahmen benutzen können. (Wofür er perfekt ist).Ich denke, es wäre kein Problem diese Funktionen per Firmware-Update freizuschalten/hinzuzufügen - und dann wäre dieser Recorder auch zusätzlich als USB-Interface wirklich gut geeignet - wofür ja auch Werbung gemacht wurde.Deswegen 1-Stern Abzug von mir.
Aanbevolen producten