Winkelwagentje

Winkelwagen is nog leeg.

Winkelwagen is nog leeg.
Op voorraad

THERMALRIGHT TF7 2 g warmtegeleidende pasta voor koeler, warmtegeleiding 12,8 W/m.k-2 gram, met spatelgereedschap (TF7 2g)

1,99€ 4,39€
Gratis verzending bij bestellingen boven 25,99€

Productdetails

  • Hoge prestaties: uitstekende prestaties zijn afkomstig van zijn eersteklas gegevens, warmtegeleiding tot 12,8 W/m.k, het heeft een goede balans van de hoge koelprestaties.
  • Stabiliteit: de beschikbare temperatuur is -150 °C / +250 °C, warmteweerstand < 0,01, dichtheid is 2,8 (25 °C). Ook bij hoge of lage temperaturen wordt het koelvoordeel niet beïnvloed.
  • Veiligheid: het bevat geen metalen deeltjes, olievrije oplosmiddelen, niet-geleidend, niet corrosief, onschadelijk, het is vriendelijk voor CPU en GPU en zal de elektronische componenten niet beschadigen.
  • Duurzaamheid: het warmtegeleidende siliconenvet heeft een lange levensduur en lage vluchtigheid, die zijn warmtegeleiding in CPU, GPU, radiatormodule, chipset, sensor en andere elektronische componenten voor een lange tijd kan behouden.
  • Gemakkelijk aan te brengen: de naaldvormige ontwerpen zijn comfortabel voor gebruik en opslag. De pasta is niet stijf en wordt geleverd met een spatel, het is eenvoudig te gebruiken. Het wordt aanbevolen om 5 of 9 punten op het oppervlak van de CPU te maken.


Productbeschrijving


TF7 CPU thermische pasta
TF7 CPU thermische pasta
TF7 CPU thermische pasta
TF7 CPU thermische pasta
TF7 CPU thermische pasta

Enzo Leclercq
8 augustus 2025
Bonne pâte thermique en sois mais assez dure a appliquer elle refroidi convenament bien en la chauffant un peu elle se ramolli donc une application meilleur je la recommande
Edu B.
22 juli 2025
Gute Qualität
Cliente
7 juli 2025
Una buena pasta termica. A mi se me hace muy facil expandirla con su paleta. Se nota mucha diferencia en cuanto a la velocidad en la que mi tarjeta grafica y procesador elevan sus temperaturas. Y comprado con una pasta termica barata he notado una difrencia de unos 4-5 grados. Llevo algunos años usandola y nunca decepciona. Un truco para expandir mejor la pasta en el chip al que le vayas aplicar y es que la apliques en el borde de la paleta y luego presiones sobre el chip y la expandes de forma que qued euna capa fina
Z. M.
16 mei 2025
Do not bother using the spreader bundled with the thermal paste, it is a little too thick and rigid for it to spread easily with the spreader and you will only make a mess out of the application. What I ended up doing on my RTX 3080 12GB is to apply some in the middle and then just small dots on the four corners of the GPU die. So far, one week in, the temps are much better.Edit: Update. 2 Months later and I've been using this to repaste many of my electronics, 2xlaptops, 2xGPUs and 1xCPU and honestly this is way better than any of the shelf thermal paste I've used. Temps have been fantastic and I had no issues getting full coverage on the things I was pasting even without using the plastic paste spreader.
massimiliano
20 januari 2025
devo ancora usarlo ma penso che funzioni bene