Timbertech Professional Piston Oil-Less rustige airbrush-compressor met koelventilator ABPST08 voor hobby, tattoo, nagel, enz.

Goed werkende compressor snel op druk en druk is goed regelbaar tijdens airbrush blijft hij keurig op druk. Motor is fluisterstil.

Håller du inte på med att måla hela dagarna, utan du målar några modeller då och då, så är det en perfekt kompressor enligt min mening. Motorn kan bli lite varm efter mycket användande, men det var inget som störde mig.

Yaklaşık bir yıldır model/maket boyama işlerinde, ev ortamında kullanıyorum. Gayet yeterli. Rahatsız edici bir sesi yok. Tankı biraz küçük ama bu sayede fazla yer kaplamıyor. Tavsiye ederim.

très satisfait

A few reviews here complain of this air compressor overheating if run continuously for 20 minutes which is entirely correct, it will overheat if run continuously because it was not designed to do so.I bought this to replace a compressor I had owned about 10 years that was virtually identical this unit but without the reserve tank, and as long as you held the airbrush spray button down the motor would run, it was not over noisy but the idea of a reserve tank holding 3 litres seemed a good idea.It is, if like myself you spray a small area at a time on 1/35 tanks etc you can mostly use the your air-brush from the stored air with the motor kicking in briefly and occasionally to keep the reserve tank topped up which is nice, much less noise.If you do larger models such as 1/16 tanks which I also do you will exhaust the reserve 3 litres quite quickly and the motor will be running more often.Even on large 1/16 kits I have never had this compressor shut down due to overheating but these things do get hot to the touch which can seem alarming but is quite normal.It has plenty of safety features such as a thermal cut-out and comes with. a moisture trap which is essential to avoid disappointment when finishing a model and a great splat of water shoots from the gun and ruins it.Upon first starting I was indeed impressed at how quiet it was but I am sure that the 2nd time I started it, it was a bit noisier, a slight metallic rattle that had not been there there initially.In hindsight I wish I had checked it with a decibel meter then I would be sure, it is not distracting and was not worth returning it but I am fairly sure that something changed.I mainly use a Harder & Steenbeck air-brush at about 15 psi and this runs perfectly, no surging or loss of pressure, it keeps a continuous smooth air flow going for even paint application.I have probably used it for about 100 hours in total by now and everything is still fine, any increased noise has not got worse and of course I could be wrong anyway, maybe my ears cleared a bit the 2nd time running.I paid £79.99 in 03/23 which was a very good price, it will never be as good as an Iwata or other similar top end models but it is a quarter of the price yet I would still recommend it for its intended purpose which is small scale air-brushing, nail art etc.Excellent little compressor and always remember to drain the tank after use to prevent internal rust forming in the tank.

Der Timbertech ABPST08 Airbrush-Kompressor ist eine ausgezeichnete Wahl für Airbrush-Liebhaber, die Wert auf Leistung, Zuverlässigkeit und ein leises Arbeitsumfeld legen. Der Kompressor ist mit einer leistungsstarken Einzelzylinder-Kolbenkonstruktion ausgestattet, die konstanten Luftdruck liefert und dabei bemerkenswert leise arbeitet.Besonders hervorzuheben ist der integrierte 3-Liter-Druckbehälter, der einen gleichmäßigen Luftstrom sicherstellt und dafür sorgt, dass der Kompressor nach Erreichen des gewünschten Drucks automatisch abschaltet. Diese Funktion spart Energie und erhöht die Lebensdauer des Geräts. Zudem startet der Kompressor bei Bedarf automatisch wieder, wenn der Druck absinkt, was den Arbeitsfluss angenehm flüssig hält.Der eingebaute Kühlventilator ist ein weiteres Plus, da er die Arbeitstemperatur niedrig hält und den Kompressor auch bei längeren Airbrush-Sitzungen zuverlässig arbeiten lässt.Hervorzuheben ist die einfache Handhabung des Kompressors, sei es im Modellbau, beim Custom Painting oder anderen kreativen Projekten. Das leichte Gewicht erleichtert zudem den Transport, was für mobile Künstler besonders praktisch ist.Insgesamt bietet der Timbertech ABPST08 ein hervorragendes Preis-Leistungs-Verhältnis. Er ist sowohl für Anfänger als auch für fortgeschrittene Airbrush-Künstler eine lohnende Investition. Wer einen zuverlässigen, leisen und leistungsstarken Kompressor sucht, wird mit diesem Modell definitiv zufrieden sein.