Winkelwagentje

Winkelwagen is nog leeg.

Winkelwagen is nog leeg.
Op voorraad

TRIXES 2PC Krabklem Standaard Bureautafel Muur Paneel Klep Houder Professioneel 1/4' and 3/8” Draad

4,99€ 11,60€
Gratis verzending bij bestellingen boven 25,99€

Productdetails

  • Krabachtige klem voor veilige bevestiging aan bureaus, steunen, wandpanelen en meer
  • 1/4 "en 3/8" schroefdraden voor tuigage apparatuur zoals verlichting, flitsers, reflectoren, camerabevestigingen
  • Klem opent tot 5,5 cm
  • Ideaal in foto- en filmstudio's
  • Metalen constructie met rubber beklede kaken


Productbeschrijving

TRIXES Krabklem Standaard Bureautafel Muur Paneel Klep Houder Professioneel 1/4" and 3/8” Draad
Deze sterke krabklem is geweldig voor foto- en filmstudio's en kan overal ter wereld aan alles worden bevestigd tot een dikte van 5,5 cm; frame, stands, bureaus en tafels, wandpanelen en meer. Het heeft twee schroefdraden voor het bevestigen van apparatuur, 1/4 "en 3/8", montageverlichting, flitsers, reflectoren, camera's, monitoren en meer.

Kenmerken
Krabachtige klem voor veilige bevestiging aan bureaus, steunen, wandpanelen en meer
1/4 "en 3/8" schroefdraden voor tuigage apparatuur zoals verlichting, flitsers, reflectoren, camerabevestigingen
Klem opent tot 5,5 cm
Metalen constructie met met rubber beklede kaken

Bevat
2 x Krabklemhouder


Mielotxin
20 juli 2025
De media kon niet worden geladen.
Rachel
5 juli 2025
Die Klemmen nutze ich zweckentfremdet als Halterung einer Folie an der Dachreling. Die Dinger sind stabil und sehr gut verarbeitet.
ADH
22 januari 2025
The price of these clamps is really competitive and the quality is as good as those costing several times the price. They feel solid, well-made, and the two threaded holes, for 1/4" and 3/8" mounts, are both accurately cut and deep enough to properly fit standard adapters.Remember that these clamps do not include adapters so if you wanted to mount a small camera, for example, you would probably need to use a 1/4" male to 1/4" male adapter, and if you wanted to mount an action camera, you would probably need a 1/4 male to GoPro mount adapter. Microphone holders often use 3/8" mounts.The jaws open to a maximum width of 52mm (2.1 inches), although at that width you would have very limited grip. This type of clamp works best on things like pipes, microphone stands, 16mm to 25mm shelving panels etc. When using this type of clamp, they only need to be finger-tight. Many people try to tighten them far too much which invariably strips the threads, and then they complain it was poor quality when really they should be blaming their own poor technique. Use them sensibly and you get a much longer life out of them.The one downer on this product was the delivery. There was a small but perfectly reasonable delivery charge on the product. It was sent by Royal Mail which is so slow and unreliable compared to Amazon's own deliveries. But that is a criticism of Royal Mail, not the seller. For future reference, there was no wasteful bulky packaging on the clamps so they came through the letterbox quite easily, no signature required.
puccet
24 november 2024
Un po’ ingombranti ma per il resto perfetti
Ivonne
22 november 2024
Ich nutze die klemmen um mein Tarb an der Dachreling vom Auto individuell befestigen zu können. Das funktioniert hervorragend. Somit erfüllen sie für mich Ihren Zweck.