Winkelwagentje

Winkelwagen is nog leeg.

Winkelwagen is nog leeg.
Op voorraad

Universele motorfiets achter hydraulische remdruk lichtschakelaar 10x1 25 mm voor scooter bromfiets crossmotor ATV 10 * 1MM default-Schakelaar Achterrem

3,99€ 9,39€
Gratis verzending bij bestellingen boven 25,99€

Productdetails

  • 【Premium kwaliteit】 De schakelaar voor de achterste motorrem bestaat uit hoogwaardig aluminium en kunststof. Deze hydraulische remlichtschakelaar is duurzaam, krachtig en garandeert een lange levensduur.
  • 【Hydraulische remschakelaar】 gloednieuwe achterwielremdrukschakelaar voor het hydraulische remsysteem. Afmetingen: 10 mm x 1,25 mm of 10 mm x 1 mm naar keuze. Stabiele eigenschappen, hoge betrouwbaarheid.
  • 【Compatibiliteit】 Deze hydraulische remschakelaar is compatibel met de meeste motorfietsen, zoals met voor voor voor
  • 【Kwaliteitsbeveiliging】Alle onderdelen zijn vóór verzending onderworpen aan een kwaliteitsborging en uitgebreide testprogramma’s. Als je na gebruik problemen ondervindt, geef ons dan geen negatieve feedback. Omdat het product een flexibele configuratie betreft, neem dan met ons op en wij bieden je een bevredigende oplossing.
  • 【Service – Wij staan hier voor een productbelofte om je de beste klantenservice te bieden. Aarzel niet om met ons op te nemen als je om welke reden dan ook niet tevreden bent. Wij beloven dat het probleem binnen 24 uur is opgelost.


Productbeschrijving

Universele hydraulische remdruklichtschakelaar voor motorfietsen achter, 10x1,25 mm, 10x1 mm voor motorfiets motorscooter Dirt-Pit-Bike-ATV
Specificaties:
Voorwaarde: gloednieuw materiaal: aluminium hoofdkleur: Zwart
Afmetingen: M10 (10 mm) diameter x 1,25 mm draadhelling
M10 (10 mm) diameter x 1 mm draadhelling (optioneel).
Totale lengte: 28 cm schroefgrootte (L x D): 32 x 10 mm Gewicht verpakking: ca. 35 g
Inhoud levering:
1 x hydraulische remdruklichtschakelaar.
2 x sluitringen.
Opmerkingen:
1. Houd rekening met een foutmarge van 0 tot 1 inch vanwege handmatige meting. Bedankt voor je begrip. De installatie is eenvoudig, maar een professionele installatie wordt ten zeerste aanbevolen.



MikeMike
6 juli 2025
Only lasted a couple months. Started to leak where the wire goes into the body and i lost my brakes.
Jody S
8 juni 2025
This is exactly what I needed to replace the terrible mechanical brake switch on my Ducati Desert Sled.With a little soldering and about 1 hours worth of work, I now can forget about the brake switch failing on me again and ride safely!Fits the Brembo master cylinder perfectly!
Sébastien Cloutier
18 maart 2025
J'ai installé cette switch sur mon KTM 450 EXC pour pouvoir faire allumer ma lumière de frein. Ça a bien fonctionné un été, mais l'année d'ensuite, l'huile s'est mise à suinter sous le capuchon de caoutchouc autour des fils (pas par les seals) et elle allume de façon très aléatoire. C'est une switch de qualité très douteuse.
D.C.
7 maart 2025
I installed these on my GasGas EC300. I was concerned at first that they may not fit because the threads are 4-5mm longer than the stock bolt these replace, but they did fit without modification.Unfortunately, the quality of the switch seems to be pretty poor. The first switch I installed I noticed the wires coming out of the top of the switch had the insulation cracked where it was potted into the body of the switch. So, i just filled the rubber cap with dielectric grease and hoped for the best. About an hour into my first ride I noticed the brake light was no longer coming on.So far the second switch is still working, but who knows how long that will last. The wires looked better on the second switch, so maybe it will be OK.
elroy mackenzie
21 december 2024
Did not fit