USB Floppy Emulator Bijgewerkt USB Floppy Drive Emulator Sfr1M44-U100K Update Versie Floppy Drive 5V Dc Voeding

I have two Yamaha keyboards, 1 static and 1 portable that had floppy disc drives. The oldest developed a fault and I upgraded to usb using these emulators. The mounting holes were an exact match for both top and side fixing. One was easy but the other was tricky as the connection layout was slightly different and the cables did not have any spare to work with. Once fitted, they worked wellSadly, Despite being a very small package, Royal Mail failed yet again to deliver on time. It sat three days in a depot and failed to go out for delivery on the due day.

Good

Fantastic product, easy to install (see philscomputerlab or other youtube videos), works great.Here's a couple pieces of information I figured out by trial and error. I am using this emulator in a Yamaha SU700 sampler. The SU700 has 68MB of RAM and supports storing data across multiple floppies. To make this emulator do that, YOU HAVE TO MOVE THE JUMPER (small plastic metal connector between 2 pins) FROM THE S1 SLOT TO THE S0 SLOT. The S1 slot configures the emulator as an ADDITIONAL floppy drive; the S0 slot configures it as a REPLACEMENT drive that will be the only "floppy drive" on your machine. This may apply to other appliances or computers on which you may be using this emulator. If you're having trouble saving to multiple virtual floppies, try it.It's easy, just get some tweezers, pull out the jumper next to where it says S1, and put it back in the S0 slot. That's what they're made for.SECONDLY, to "close out" when saving multiple virtual floppies on the emulator, YOU MUST MOVE THE COUNTER TO THE NEXT NUMBERED FLOPPY after the process is complete and before turning off the machine. This is like pressing the EJECT button before you pull out a USB drive. If you don't do this, when you try to load your saved data off the USB flash drive, you'll get an OPERATION FAILED message at the very end of the loading process.. Tip: just always click the emulator one number forward before you turn off your machine, and you'll be fine. I think of it as "closing the book" or "turning the page."BTW, I purchased the Yosoo emulator, but the one I received is marked Gotek. I don't care, it works great, and I assume everything I'm saying here applies equally to Gotek and Yosoo emulators, and that they're probably the same. Good luck and enjoy.

Habe das Ding in meinem Yamaha CVP 98 eingebaut nachdem das Floppy den Geist aufgeben hatte. Hat sofort funktioniert, der Einbau war sehr leicht, keine Jumper oder ähnliches mussten gesetzt werden und das Originalkabel vom alten Floppy hat genau gepasst. Die Software dazu ist schon etwas umständlich und man muss sich damit etwas beschäftigen. In der Praxis habe ich schlussendlich nur die Software zum Formatieren hergenommen. Ich hatte dann zwar nur 1,44 MB auf dem Stick verfügbar aber für meine kleinen Midi-Dateien reicht das völlig. Mehr Dateien wären auf dem Clavinova ohnehin schwer zu verwalten. Das CVP kennt keinen Unterschied zum Floppy. Aufnehmen, Abspielen wie vorher. Die Ladezeiten im Vergleich zum Floppy sind jetzt angenehm.

Works great on an old 486 motherboard. Unfortunately the device doesn't come with any instructions (which was my main disappointment - not even a web link). I found that in order to get it working more easily I had to get a USB-C to USB-C cable to update the firmware and install flashfloppy. With an associated configuration file this then worked well and I could simply copy across floppy image files to a USB memory stick and plug that in.