VCE 50-pack CAT6 RJ45 doorvoer modulaire pluggen, 3-polige vergulde Ethernet 50u' EZ-krimpconnectoren voor massieve of gestrande UTP-kabel

Simpel en effectief

Great value for a low price. Just good stuff!

Makkelijk in grbruik

For those who are complaining that these are more difficult to use than the standard non-pass through style, you must be doing it wrong. For best results, you shouldn't need to cut and then pull back before terminating. It should be done in one motion with the correct toolFor those who are thinking about doing some custom cables and are new to making RJ45 jacks, these pass through connectors are a great way to learn and hone your skills. As long as you have the correct termination tool, these are noob friendly.. all you need to do is cut off way more cable than you need and slide them in one by one. Some of my solid copper 23awg cat6 cables don't like untwisting and end up binding a bit but these jacks make it a pinch by allowing you to do it one at a time. You may need to twist the jack a tiny bit to wiggle the wire in. I have a much easier time with stranded cable as those untwist easier and you don't have to waste as much.If the cables don't want to untwist much, you'll have a hard time lining all 8 at the same time. If you do it one by one and then use some pliers to pull the slack, you make your life much easier.Now you can make some really short custom cables, great for neat cable management if you have a rack.

Matériel bon qualité

Lätta att använda när man kan ha längre trådar och ser var dom ligger i kontakten i och med att dom går igenom kontakten

iyi

I used these plugs in combination with the solsop crimping tool for pass-through connectors.Other reviews mentioned that it was difficult to successfully attach a connector from the first attempt. But I found it very easy to do so.