VEVOR 7-in-1 weerstation met wifi, 7-inch TFT-kleurendisplay, buitensensor, bewaking van binnen- en buitenruimtes, inclusief temperatuur, luchtvochtigheid, windsnelheid

Works well easy to set up. Wind speed indicator works great.

complicata da fare apparire on-line pws su portali meteo.

Gekauft wegen der Übersichtlichkeit des Displays wurde ich auch vom Rest nicht enttäuscht. Alles macht einen Soliden Eindruck.Die Messeinheit ist auf einem Kugelkopf montiert was den Aufbau etwas aufwendiger macht aber dafür eine etwas schiefere Montage der Grundplatte ermöglichen würde.Finde ich nicht schlecht.Der Empfang ist jetzt nicht extrem Weit aber durch zwei Mauern hindurch.Keine Probleme.

This seems well built but for the $$ I was expecting better way to monitor the weather at my camp. The app needed to see the report is more a web site so you'll need a lap top to make it easier

All working and connected and uploading to Weather Underground and Weathercloud.Issues Encountered and Solved was Connecting to the Internet (Below is the solution)The wifi is only located in the 7 Inch TFT display (if wifi option selected). The weatherstation transmits RF to the TFT display and will work without the internet. To connect the TFT to the net you must have 1.) a 2.4Gig wireless router and know its password 2.) a separate wireless device that connects to the TFT display. The steps are1. Enable "connect mode" on wireless on TFT display, the screen displays you are connected (this mode lasts about 5 minutes then goes back to normal display. When configuing the TFT screen must be left in the "connected" screen and must be restarted again until you get the other steps done otherwise it won't connect when the main screen is being displayed)2. I used a windows laptop and with it's wireless I connected to the TFT display; after connecting3. Open a web browser on that laptop and enter 192.168.1.1 (this will connect you to the TFT config display- again, you must have TFT in connect mode screen)4. A TFT config screen will open on your browser; You can now config: With a drop-down find your wireless router and select5. enter router password6. put in you weather underground id and pin (must have already gone online and setup free account to get id and pin.7. put in you weathercloud id and pin (must have already gone online and setup free account to get id and pin.8. Save this info. This alone will save to the TFT display and enable it to connect to your router, and stay connected and synced to the internet and then automatically upload your data to these websites.9. I did all this and it didn't work so I repeated all steps above and it finally worked and has continued to work very well.all this info is in the manual, but my android phone just couln't display the config screen on a web browser (don't know why), so I used a laptop and got it to display on that.5 stars based on price and overall result.