Winkelwagentje

Winkelwagen is nog leeg.

Winkelwagen is nog leeg.
Op voorraad

VGA naar USB 2.0 video-omzetter, audio- en video-opnameapparaat, plug-and-play, zonder USB-stick, 1080p HD-video-opnamegereedschap voor Windows, Linux en Android

17,99€ 39,23€
Gratis verzending bij bestellingen boven 25,99€

Productdetails

  • Video-opnametool: de VGA-converter is een audio- en video-opnameapparaat dat VGA-signaalingang en USB 2.0-interface-uitgang naar de computer ondersteunt. Het is een voordelige audio- en video-opnamekaart die voldoet aan de UVC/UAC-specificaties.
  • Ondersteunt meerdere apparaten: het video-opnamegereedschap is compatibel. Het is een HD-video-opnametool zonder USB-station voor Windows, Linux en Android. VGA-kaarten worden vaak gebruikt bij het vastleggen van video in medische apparatuur, zakelijke videoconferenties, onderwijs, en zijn compatibel met OBS, POTPLAYER, AMCAP, VLC en andere opnamesoftware.
  • Plug and Play: de VGA-converter hoeft geen driver, plug and play te installeren. De VGA-opnamekaart ondersteunt een onafhankelijke audio-ingang zonder voeding. De verpakking van de VGA-kaart: een VGA-opnamekaart, een USB-kabel, een VGA-kabel.
  • Beeld in HD-kwaliteit: real-time VGA-opnamekaart met 1080p HD-beelden met 30 fps in beeldkwaliteit 720p 60 fps en andere groottesoluties, zodat je kunt genieten van een soepele HD-beeldopname-ervaring.


Productbeschrijving


De introductie van de VGA-opnamekaart

VGA capture card

De introductie van de VGA-opnamekaart

VGA-converter gebruikt in video-opname van medische apparatuur, zakelijke videoconferenties Onderwijsveld, computer VGA-signaalacquisitie, enz.

VGA Capture zet VGA-signalen zoals computers, embedded systemen, medische apparatuur, wetenschappelijke of laboratoriumapparatuur om in USB-signalen, en voltooit het verzamelen en opnemen van VGA-signaalvideo via computers, notebooks en andere apparatuur, en ondersteunt synchrone microfoonaudio-invoer.

De specificatie van de VGA-opnamekaart:

VGA capture card

De specificatie van de VGA-opnamekaart:

Invoerpoort: VGA

Uitgangspoort: USB2.0

Resolutie video-uitgang: 1920*1080, 1600*1200, 1360*768, 1280*1024, 1280*960, 1280*720, 1024*768, 800*600, 720*480, 720*576, 640*480

Framesnelheid: 5 ~ 60 frames instelbaar;

Audio- en video-opname: Standaard UVC/UAC

Drive: het is niet nodig om de driver te installeren, plug and play!

Bedrijfstemperatuur:-20 ~ 65

Werkvochtigheid: 5% -90%

Resolutie: 64 MM * 51 MM * 21 MM:

Gewicht: 60g

Hoe een VGA-opnamekaart te gebruiken

VGA capture card

Hoe een VGA-opnamekaart te gebruiken

1. Sluit de VGA-signaalbron aan op de VGA-ingangsinterface van de opnamekaart

2. De USB-uitgang van de capture-kaart wordt via de USB-kabel aangesloten op de USB-poort van de computer (schijfvrij)

3. Sluit voor audio-invoer het audiosignaal aan op Mic in

4. Open de acquisitiesoftware op de acquisitiecomputer, selecteer het apparaat AFN_Cap video en activeer het. Op dit moment knippert het rode LED-lampje, wat aangeeft dat de signaalacquisitie succesvol is.

VGA to USB

VGA-opnamekaart naar USB

Paklijst VGA-opnamekaart:

1 * VGA

1 * VGA-kabel

1 * USB-kabel


Clive Fox
5 augustus 2025
Needed this to capture some scientific data off an old recorder with a VGA output. The setup was easy and windows recognised the USB device - then used freeware OBS Studio to capture the output. Device is also powered through the USB cable so no need for an additional power supply. Great little tool for the price.
batman
11 juli 2025
fait le job
Lakis
29 mei 2025
Tut genau was es soll. Mit verschiedenen vga quellen getestet, funktioniert anstandslos :)
42BS
17 april 2025
Ich benutze das Teil um Videos von meinem Atari Lynx aufzunehmen ohne viel Kabelgewirr. Dazu taugt das Gerät obwohl es immer mal wieder zu "Aufschlucken" kommt.Ein negativer Punkt ist, das der USB Anschluss nicht Standard ist (USB-A nicht USB-B). Wenn also mal das USB-A auf USB-A Kabel weg ist, kann man nicht einfach in der Kabelkiste eines herausfischen.
Arthur "two sheds" Jackson
28 november 2024
I bought this to use as a portable console for servers with VGA outputs so that I don't have to lug a monitor around. Works and comes up as a generic composite / video capture device, no drivers needed, and you can use your Camera app or vlc or whatever as the viewer, you can even use this with an Android phone. But there's no way to find out what particular VGA resolutions it supports, and for some resolutions it doesn't center / auto align the screen and you're left with a partial view, which is a bit "unhelpful" (I'd normally use other words to describe this) if you're using this to install an OS and you can't see one third of the screen where the important controls are. Yes, some OS installerses insist on high and weird resolutions, it's not this converter's fault, but a monitor would have worked, and so should the converter.