VGOL Stervormige DIY Elektronische Soldeerkit Project LED Solderen Praktijk Set Circuit PCB Boards met Case & Usb-kabel voor Lassen Beginners

The case is difficult to assemble and being brittle plastic, is easily broken. The leds vary in quality and I recommend testing the before soldering. The pcb holes are a tight fit, so after soldering the other components ( the ic socket is difficult because pcb is poorly designed ), insert all leds into the pcb and push fully down ( again poor pcb design will not allow them to be vertical ), then because the holes are plated through it should be possible to power the unit and check all leds before carefully and quickly soldering them. Do not cut off the leads until you have soldered and checked them as the leads help as a heatsink to prevent damage to them and once soldered are VERY difficult to remove. Found an incorrect part sent for the case, so one side can't be fitted, but there are no fixings in the kit, so had to use without case, or glue together.

Divertente da montare e ci sono dei componenti in più. L'unico appunto è la mancanza totale di istruzioni, se non per il montaggio del circuito facilitato dalla serigrafia sullo stampato, almeno per assiemare il contenitore.

Der LED Lötbausatz und gleich ein passende Gehäuse dazu ist finde ich sehr sehr gut !!!

Leider habe ich keine Beschreibung im Internet gefunden. Dabei war auch keine. Schade. Wenn man schonPraxis mit Led-Löt Platinen hat kann man es auch ohne Beschreibung zusammenlöten.

De media kon niet worden geladen.