VIVO Adapter VESA Mount Quick Release Bracket Kit, Stand Attachment en Wall Mount Verwijderbare VESA-plaat voor eenvoudige LCD-monitor en tv-schermmontage, Stand-VAD2

Works great or monitor arm setup(another quick release monitor didn't include nuts and washers), heard a nice click when putting it on, seems stable. Will update review to 5 stars if my monitor doesn't fall off it within a couple months

This mount can be VERY useful to solve unique mounting issues...with some caveats as others have noted....The GOOD to GREAT: Used this mount to fix an HP branded 27" monitor to a Dell-specific 27" stand. As you look at OEM-specific stands, they are generally similar, with the difference being mounting bolt patterns and spacing on the monitor mounting heads...not VESA, but kind-of similar. Typically these are flat metal plates with a variety of holes, tabs, and slots that line up with the specific quick-release mounting plate pattern on the back of their own screens.* I had an extra Dell 27" stand, and using a standard VESA plate as a pattern, I found 2 top holes that lined up with the top 2 holes of a 75mm VESA mount. (Yes you do need to remove the trim plate(s) and remove the center screws that hold the plate to the mounting base top/tilt plate.) I marked 2 additional spots from the 75mm spacing, and and then drilled out, now having 4 holes that matched VESA mount spacing, at 75mm.* Different vendor OEM plates may require some fudging with 75mm and/or 100mm spacing until you can find or create holes that allow fixing of the Vivo VESA mounting adapter "back" plate.* I took off the square plastic Dell trim from the top of the stand, but was able to leave the small circular trim that covers the top tilt plate and spring tension mechanism.* Before reassembling, I sprayed the back of the top plate with some leftover paint, so that it wasn't bare metal...not necessary, but a nicer look.The MEH to MAD: As others have noted there are some manufacturing or quality type issues. Mine was opposite of other reviewers, in that the mounting and VESA adpater plates were so tight I had to use a hammer to initially separate. I tried to bend the grooves and plate around to loosen the fit, but does not easily or reliably release to allow removing the monitor. Once I fully mounted, it essentially froze tight again. It's not the biggest issue, and better than being loose and wobbly, but I would like the option to remove the screen from the stand as intended. Not a deal breaker. But a little discouraging, and reason for 4-star review.This mount is soooo close, but does enough to make it a really useful option for some unusual mounting situations. It's definitely worth trying to see if it works for your needs.*******************************************************************************UPDATE 5/29/25: Despite the issues with the first mount, I purchased 2 additional, for a total of 3. Neither of the newer ones had the binding problem, and appear to cleanly release. I'm upgrading my review to 5 stars.Have now adapted a 2nd Dell stand (24") that required re-drilling all 4 holes for proper alignment/attachment. And, also an older Samsung stand (early 2000s 20.4" 204B)...all 4 holes in the metal bracket aligned with the 100mm holes, and just had to drill out the plastic trim behind the metal mount.VERY useful mounting bracket. Definitely try if you need to mount unlike monitors without buying a new VESA stand.

Cumple completamente con lo publicado y se aprecian materiales y fabricación de alta calidad, además, incluye todo el hardware necesario para su montaje. Se utilizó para montar una HP ELITEDESK 705 G3 MINI atrás de un monitor para hacer una "pseudoAllIn One" y quedó excelente. Altamente recomendado.

Für Monitor, Fernseher..hält super.

It works and solves my problem.