Winkelwagentje

Winkelwagen is nog leeg.

Winkelwagen is nog leeg.
Op voorraad

Volledige normelementen | kogelschijf en kegelpan - DIN 6319 | inzetstaal | 25 stuks Conische pan Bohrungsdurchmesser d2: 7,1mm zwart

7,99€ 14,57€
Gratis verzending bij bestellingen boven 25,99€

1.:Kogelschijf


2.Maat:4mm


Productdetails

  • Boringsdiameter d2: 7, 1 mm; diameter pan d3: 12 mm; dikte pan h3: 2, 8 mm; totale hoogte h4: 4, 2 mm.
  • Verpakkingseenheid: 25 kegelpannen
  • Passende schijf: DIN 6319-6, 4-C
  • Staal: gehard EHT 0, 2 tot 0, 4 mm hardheid (550 + 100) HV 10.
  • Maximaal overdraagbare statische schroefkracht in kN: 9


Productbeschrijving

Kogelschijven en kegelpannen DIN 6319 worden gebruikt wanneer spanelementen zich aan niet-parallelle oppervlakken moeten aanpassen. Bij gebruik van zeskantmoeren DIN 6330 vorm B vervalt de kogelschijf.


J. QUINN
12 februari 2025
Photo shows a pair of convex and concave washers but the pack only contained 25 convex washers. I sent them back as I was not offered the matching concave washers. They were supplied from Europe so returning them involved a large envelope to affix the large customs forms to despite the fact that the packet was tiny.
Kees Blokland
25 januari 2025
This article is NOT as shown! You will receive only the top part, not the accompanying bottom cup.So this ends up being very expensive!I am sure the vendor will claim that you get exactly what it says, but then make sure the image matches!