Voorderschakeling Shimano Claris FDR2030 2

This is a much better built front derailleur than SORA. The Sora broke the spring tab on two different bikes. It's hard or impossible to find the Sora, but that's OK because I wouldn't want one of those again. This seems better and works on 8/3 and also a 7/3 gearing. It has a fairly wide cage so if you have micro adjust levers or "1/2 steps", you can adjust any cage contact. This one does not have a cage that opens up, so you have to break the chain to put it on.

Je suis vraiment content de ce dérailleur avant! J’avais à remplacer un Shimano Sora avec 3 plateaux à l’avant et ça fait à merveille! L’ajustement est meilleur que celui de mon Sora!

2008のエスケープR3をフラットバーロード化してたけどフロントディレイラーのバネがオシャカになったので三段のソラを探したけどもうなかった。　まあこれも三段だからどうにかなるかなと思い購入しました。ワイヤーを張って止めるだけで取付も調整も気が抜けるほど簡単でした。　長持ちするチャリです。

Replacing a micro shift unit. Easy to set up and calibrate for a 3x8 set up. No rubbing in any of gear configuration. Changing is precise.

I used this derailleur on a vintage 1985 Schwinn High Sierra mountain bike running a 7x3 style drivetrain to be able to shift the front chainrings with a Shimano RSX road bike brake/shift lever. I needed this to match the cable-pull ratio of the shifters; road bike and mountain bike front shifting systems do not share the same cable-pull ratio, and I needed the ratio to match since my shifters were indexed shifting only. This worked perfectly for what I wanted. My only negative is that I had to use a shim, which was included, in the mounting clamp to fit the derailleur to my frame. I don't like using shims to make things fit, but at least the shims are designed to fit the clamp and they are included with the derailleur. There is also no fine adjustment such as a barrel adjuster on the cable tension, so I added an inline barrel adjuster from Jagwire to the front shift cable which made dialing in the front shifting much easier.