Waveshare Industrial USB to RS485 Converter with Original FT232RL Automatic Transceiving Embedded Protection Circuits such as Fuse ESD Protection and TVS Diode

Easy to use to scan BaCnet MSTP network.Small and handy tool to troubleshoot and connect devices via serial.

Perfekt wenn die Leitung länger als das 5 bzw. 10m Fertig-Kabel von Victron sein muss. Auch geschirmte Leitungen lassen sich damit verwenden.

J'utilise ce module pour la communication entre un CerboGX de chez VICTRON et un ET340. Une vingtaine de mètres séparent les deux appareils et la fiabilité est au rendez vous. C'est parfait.

This isn't the cheapest RS485-USB adaptor out there, but it does provide some neat features which the entry-level adaptors do not.What I like about it:- It's isolated so any noise or voltage differential on one side isn't going to kill / affect the other side. Cheap adaptors do not provide this level of protection.- It comes with a short USB extension cable so you can use the cable and not have the adaptor block other adjacent USB ports when connected directly to the host.- It comes with a small disconnectable block. This allows you to wire up the cable to the block without fiddling with the adaptor itself. You can also easily disconnect the RS485 side without removing the device from the host.- It comes with a small screwdriver for the Phoenix-style connector. So everything you need is provided. The screws are small but still decent enough to not be too fiddly or weak. Other smaller USB adaptors have very small fiddly connectors which are prone to failing or cross-threading the screws in attempting to lock down the connection.Overall a great little adaptor and for the extra features it provides, is well worth the cost in my opinion to the slightly cheaper adaptors out there.

fantatisco