Raspberry Pi Pico W Microcontroller Board with pre-soldered headers , Built-In WiFi, Based On Official RP2040 Dual-Core Processor
Board Specifications
Based on Raspberry Pi Pico, Raspberry Pi Pico W comes with a wireless communication module. The wireless module hardware uses
CYW43439 wireless chip, which supports Wi-Fi 4 wireless networks in the 2.4 GHz band, making it the perfect solution for wireless network control and
communication..
Key features include:
RP2040 microcontroller chip designed by Raspberry Pi in the United Kingdom
Dual-core Arm Cortex M0+ processor, flexible clock running up to 133 MHz
Onboard CYW43439 wireless chip, supports 2.4 GHZ Wi-Fi
264KB of SRAM, and 2MB of on-board Flash memory
Castellated module allows soldering direct to carrier boards
USB 1.1 with device and host support
Low-power sleep and dormant modes
Drag-and-drop programming using mass storage over USB
26 × multi-function GPIO pins
2 × SPI, 2 × I2C, 2 × UART, 3 × 12-bit ADC, 16 × controllable PWM channels
Accurate clock and timer on-chip
Temperature sensor
Accelerated floating-point libraries on-chip
8 × Programmable I/O (PIO) state machines for custom peripheral support
Package Content
Raspberry Pi Pico W with pre-soldered header x1
1*3PIN yellow pin header x1
USB-A to micro-B cable x1
Development Resources
https://www.waveshare.com/wiki/Raspberry_Pi_Pico_W?Amazon
Note
Techinical Support is provided, please contact us if you have any problem .