Winkelwagentje

Winkelwagen is nog leeg.

Winkelwagen is nog leeg.
Op voorraad
5/5
5 Recensies

Waveshare RP2350A USB Mini Development Board, Based On Raspberry Pi RP2350A Dual-core & Dual-Architecture Microcontroller, 150MHz Operating Frequency Castellated module, Suitable for SMD

4,99€ 10,99€
Gratis verzending bij bestellingen boven 25,99€

Over dit item

  • RP2350A microcontroller chip designed by Raspberry Pi in the United Kingdom. Adopts unique dual-core and dual-architecture design: dual-core Arm Cortex-M33 processor and dual-core Hazard3 RISC-V processor, flexible clock running up to 150 MHz
  • 520KB of Static Ram, and 2MB of onboard Flash memory. Type-C connector, keeps it up to date, easier to use. Castellated module allows soldering directly to carrier boards
  • USB 1.1 with device and host support. Onboard 1x USB Type A expansion port via PIO, compatible with USB 2.0/1.1 transmission. Low-power sleep and dormant modes
  • Drag-and-drop programming using mass storage over USB. Adapting 15 × multi-function GPIO pins. 2 × SPI, 2 × I2C, 2 × UART, 4 × 12-bit ADC, 14 × controllable PWM channels
  • Accurate clock and timer on-chip. Accelerated floating-point libraries on-chip. 12 × Programmable I/O (PIO) state machines for custom peripheral support, Rich WiKi Resources: We provide official Wiki resources, please visit our store and click the wiki page to get resources.



Reviewed in Canada
29 juni 2025
Clean easy to work with solder pads, extremely tiny form factor, and a Raspberry Pi SoC. What's not to love?Works as well as an arduino for teaching hardware concepts. On board LED was easy to control.Power performance isn't great, so better used for wall-powered projects, or on something like an RC vehicle that you don't expect to get weeks of use from on a charge.The pi chip used is supposed to have anti-cloning security features similar to Microchip's lineup, so it could conceivably even be used to prototype a niche hardware gadget you could sell.This is a decent price for a prototyping board, and if you make a product based on it, you can get them cheaper still and soldered onto your custom PCB.
Dov C.
16 juni 2025
Nice little controller - I wish it came pre-soldered instead of the way it did, would have saved me a lot of time.Works as indented, easy to set up and get started with it (once you solder the pins on).
neotil
11 juni 2025
Super Board zum rumspielen! Waveshare hat eigentlich immer relativ gute Dokumentation zu ihren Boards, weshalb das Setup super schnell ging.Ich habe sowohl Micropython (Thonny) als auch Programmierung mit der Arduino IDE ausprobiert. Beides funktioniert einwandfrei.Ich hab noch nicht raus, wofür man den USB-A Port sinnvoll verwenden kann. Da wird aber bestimmt irgendwann genau das richtige Projekt kommen, und dann bin ich froh, das Board in der Schublade liegen zu haben :)
Tapestry
6 juni 2025
The unit is as advertised. It has a USB C connector to the host, unlike the micro USB connectors Raspberry Pi Picos generally come with. It doesn’t come with any cables, pins, or documentation. However, there is a wiki available for this Waveshare RP2350-USB-A-board. It has a WS2812B RGB LED. Getting the LED to work was relatively easy using the neopixel module in micropython. I’ve not been able to get their USB demo software to work. It’s a fairly compact board, making it easy to fit in small projects.
Hepworth
24 januari 2025
I've ordered socks that came with more documentation and accessories.But like another reviewer mentioned this RP2350-USB-A board has a wiki on the waveshare site that can help you get started. It's a good little thing to have on hand even if you don't have any projects in mind. Relatively inexpensive, and very much so for me :) . I ran it through some tests to see what it could do, but haven't put it to good use yet. I'll think of something for it for I'm sure.

Misschien vind je dit ook leuk