Winkelwagentje

Winkelwagen is nog leeg.

Winkelwagen is nog leeg.
Op voorraad

wolfcraft Zweihaak en verstekbak I 6948200 I 2-in-1-product voor exacte wandplinten

23,99€ 45,00€
Gratis verzending bij bestellingen boven 25,99€

1.:100mm


2.Naamvanpatroon:Single


Productdetails

  • Voor het meten van hoeken en vervolgens nauwkeurig verstekzagen, bijv. van wandplinten
  • Voor het aftekenen van hoeken van 85-180° en automatisch en correct overbrengen van de verstekhoek op de zaag
  • Geïntegreerde geleidepennen voor handzagen, voor het nauwkeurig zagen van wandplinten


Productbeschrijving


2-in-1-product voor exacte wandplinten

Zweihaak en verstekbak, 100 mm

Met het afkort- en zaagblad voor het afmeten en zagen van exacte verstekken krijg je perfect passende plinten onder elke wandhoek. Hoeken van 85-180° kunnen eenvoudig worden gezaagd met de 2 beweegbare poten. De tweede stap is het plaatsen van de plint in de meegeleverde geleiders.

6948200
De video toont het product dat in gebruik is.De video begeleidt u bij het instellen van het product.In de video worden meerdere producten vergeleken.De video toont hoe het product wordt uitgepakt.
  • De afschuin- en snijlade van wolfcraft (6948200) is geschikt voor plinten tot een hoogte van 100 mm.

  • De snijlade is ontworpen voor plinten, plinten enz. tot een dikte van 30 mm.

  • Fijne handzagen worden aanbevolen. Afhankelijk van de hoogte van de plinten raden we aan om zagen zonder rug te gebruiken vanwege de zaagdiepte - bijvoorbeeld een Japanse zaag.

  • In principe kun je alle materialen tot 30 mm dik en 100 mm hoog in verstek zagen met behulp van de zwaaihaak en de snijplaat.


Drees, E
18 juli 2025
onder een kleine hoek minder goed te gebruiken
Anthony
7 juli 2025
Easy to measure corners and cutting them immediatly.
Bob van Bronkhorst
25 juni 2025
Fantastisch product. Stevig, maakt scherpe snedes, is vast te zetten. De breedte is erg beperkt, dit zou beter kunnen.
Pim VO
4 juni 2025
The design doesn't give you the right cuts as you need. Those 4 round tubes are just annoying, constantly loose and moving around, which makes it really hard to give it a cut that's not skewed.I think you're better off using a regular Mitter box. Or try another brand. This one is just not worth the money. Bad taste in my mouth from it.
Jan Hoekstra
9 mei 2025
Ik krijg helaas niet de beloofde resultaten, maar dan ligt mede aan mijzelf.
Josh M
29 april 2025
Not a bad idea, but not as precise as I had hoped. The pins that guide the saw aren't square to the base, which causes an inaccurate cut. Also, the gap between the guide pins is too large for the flush cut saw I was planning to use. It's fine for applications where caulking will be used, but for natural wood picture frames (as shown in the ad) more precision is required.
Yang Zhu
9 april 2025
One of the 4 supporting columns is not tapped so that it cannot be screwed. I hope the seller can send one
Patrick
27 maart 2025
A bit more durable than the random wood / aluminum version. But eventually succumbs to the same problem: swift wear and uneven cuts. If you only need 90 degree angles, you'd better buy a couple cheaper models.Doesn't help that there is no good way to stabalize the material as the form factor is a bit awkward.
Alain D
15 maart 2025
Outil que j.aurais du acheter plus tôt pour gagner du temps.
gaston benis
24 februari 2025
Great quality tool
Jaime Crespo
28 januari 2025
Estupendo para angulos que no son de 90 grados y con una caja de ingletes normal no puedes cortar bien el ángulo deseado. Se ajusta al rincón o esquina, se aprieta el tornillo y ya tenemos los dos ángulos listos para cortar
Vittoria
18 december 2024
Se sei appassionato di bricolage o lavori con il legno, il Wolfcraft Rapportatore Angolare e Tagliacornici è davvero uno strumento che fa la differenza. È un attrezzo che ti permette di ottenere tagli angolari precisi. Quindi, se stai cercando qualcosa che ti aiuti a fare tagli netti e perfetti per cornici, battiscopa, questo è decisamente il prodotto che fa per te.Vantaggi1. Precisione – La cosa che colpisce subito di questo attrezzo è la sua precisione. La regolazione dell’angolo è intuitiva e molto stabile, il che significa che non dovrai mai preoccuparti di tagli sbagliati. Puoi impostare facilmente angoli a 45° o 90°, e il tutto si mantiene saldo mentre lavori.2. Materiali di qualità – Non è solo un attrezzo che funziona bene, è anche costruito per durare. La qualità dei materiali, che è una caratteristica fondamentale di Wolfcraft, si sente subito. È resistente e non cede facilmente, il che lo rende perfetto per chi lo usa spesso.3. Facile da usare – Non devi essere un esperto per usarlo. Anche se non hai molta esperienza con attrezzi del genere, il design è molto intuitivo. Basta fare qualche prova, e subito capisci come regolare e usare la posizione angolare. La facilità con cui puoi fare tagli perfetti senza troppo stress è sicuramente uno dei punti forti.4. Versatilità – È molto versatile, non si limita solo ai tagli angolari per cornici, ma lo puoi usare per una varietà di materiali come battiscopa, legno, piastrelle sottili e tanto altro. Ad esempio, io l’ho trovato molto utile quando ho dovuto fare dei tagli per una nuova cornice in legno. Il risultato è stato davvero perfetto,5. Buon rapporto qualità/prezzo – Considerando quello che offre, il prezzo è davvero onesto, vale ogni centesimo. La durata e la precisione che ti offre giustificano il costo.Il prezzo potrebbe rappresentare uno svantaggio ma ne vale la pena. La qualità ripaga.
Torsten Wahlström
27 november 2024
Bästa tänkbara pris och blixtsnabb leverans