Winkelwagen is nog leeg.
Winkelwagen is nog leeg.Productbeschrijving
Overview:
This LCD is a 1.3-inch TFT display, onboard a joystick and six buttons, resolution of 240*240, internal ST7789 controller,
based on compatible with Raspberry Pi 40pin GPIO connector design, intended for Raspberry Pi Zero/Zero W/Zero 2W/Zero WH/2B/3B/3B+/4B,
can use SPI interface communication, provide for Raspberry Pi C, python version of the demo codes, it can realize points, lines, rectangles, circles painting, but also English characters, pictures to display.
Product parameters:
Dimensions: 65mm(L)*30.3mm(W)
Resolution: 240*240
Display Colors: RGB，65K colors
Control chip: ST7789
Screen type: TFT
Backlight: LED
Interface: 4 Line SPI
Supply Voltage: 3.3V
Operating Temp: -20℃～+70℃
Storage Temp: -30℃～+80℃
LCD display area: 23.4mm (W)*23.4mm (H)
Interface definition:
VCC: VDD(3.3V)
GND: GND
SDA: SPI data input
SCK: SPI clock input
CS: SPI chip selection, active at low level
BL: backlight control
D/C: Display data/command selection pin in 4-line serial interface
RESET: Display screen reset, active at low level
K1: User key K1
K2: User key K2
K3: User key K3
K4: User key K4
SW1: User key L
SW2: User key R
S1: Jointed arm
Package contents:
1.1.3inch LCD Display*1
2. Copper pillars x2
3. Screws x2
4. Nut x2
Govinda
11 juli 2025
The box includes a good user manual with source code and demo code.This is Seengreat 1.3inch LCD display ST7789VW.I managed to run demo code successfully.Github has a repository "fbcp-ili9341". With the help of this, real time desktop can also be viewed on this LCD module using SPI. This driver works only on 32 bit version of the Raspberry Pi OS. I managed to view full desktop partially and intermittently.I spent a lot of time on it to get this much working.Extremely simple to physically install this module in Raspberry Pi. It fits the Pi headers perfectly.It is an incomplete module. It is a module with buttons but excludes a case. This is not a good way to sell such modules.I am also interested in creating a Retro Pi gaming console with it but because it is unusable as a gaming console without a case, I am yet to decide my final usage.Overall good product but lacks software support for existing applications such as Retro Pie, and lacks a case/enclosure which is important because of the buttons. Just any case will not fit with it.
Xavier G.
27 april 2025
Un super petit "Hat" pour Raspberry, qui vient se brancher directement sur les GPIO.J'en ai fait une interface de pilotage pour un lecteur MP3 maison pour les enfants.
caden ellis
3 april 2025
low refresh rate, little documentation, have to write your own code
Raff
24 maart 2025
Bought for Pi Zero W. Came just with a paper with connection schema (not really useful) no command code, searched on their website and it’s not working with Pi Zero. Probably working but I don’t don’t with which device. Returned
Stepinwolf
4 november 2024
I wasn’t using this with a Pi Zero, but with the larger Pi in a case. I had problems because I couldn’t get the display to plug into the card due to the case being in the way. So I purchased some 40 pin extenders which raised up the card high enough to clear the case. These are not included in the package. The next problem I ran into was that I could not find any code to run the card. So I can’t tell you how well it works. I found some references to the driver, but was unable to get that to compile. This comes with no instructions.
Aanbevolen producten
Misschien vind je dit ook leuk
Aanbieding
5,99€
11,49€