YIHUA #948DG Vervangend desoldeerpistool-handstuk alleen voor het YIHUA 948D-III desoldeerstation, voor het EU-model.

the material feels sturdy - no comparison with the cheap zhongdi stuff.the nozzle is made of plated copper, so the heat conduction should be a lot better than with the plated iron in the ZDs.however, it is not really a high-value product, either:- the ceramic is crumbling out of the heater, as can be seen in the photo.- the nozzle sits loose on the heater, so it will suffer from suboptimal heat conduction like all the 900M clones.- the collector coil is too short to actually hold the filter with its base. consequently, the filter needs to be oversized to hold itself in place.- the release knob at the back won't snap in easily when the adjacent screw is properly fastened, as the fit is apparently too tight.- the unstructured surface of the handle feels weird.the heater has slightly below six ohms cold, so this is apparently meant for 24V operation.the sensor thermocouple is in series with the heater.

Da 4 stelle perché mi sembra assurdo non esista il ricambio del cilindro di vetro e venga obbligato tutte le volte a dover comprare tutta pistola nuova!!!È già la seconda volta.Il poche parole il cilindretto di vetro costa 30 euro....

conforme a la description