Winkelwagentje

Winkelwagen is nog leeg.

Winkelwagen is nog leeg.
Op voorraad
0/5
0 Recensies

YLY-2088 Audio Frequency Divider 400W Adjustable 2 Way Crossover Full Range Frequency Divider

5,99€ 13,33€
Gratis verzending bij bestellingen boven 25,99€
  • Details about :Jumper A, B are to control audio effect of range. A for lower limit while B for limit of the audio range. For speakers, when is turned up too much, the show distortion.
  • When happens: we remove the jumper cap of jumper A to limit super low to bring distortion lower. When we remove the cap of jumper B, is increased while cap of Jumper B is on, is decreased. Jumper C and D are to control range. When cap of both jumper C and D are on, the sound of is loudest.
  • When only cap C is on, the sound is lower. When only cap D is on, further lower. When both of C and D are removed, there is no sound. (Generally speaking, with the four , you'd sooner or later find your best sound effect. Anywya, all effects still on your actual test.)


TABL How to use the splitter board:First as per above (, Low, Input), to , seal , begin to hear music while optimize. Normally we use jumper A and let B idle. For jumper C and D: we need to hear the actual effect of . A general formula is: A+D = better ; A+C = clear and ; A+CD = clear and (the overall effect inclined towards ); +CD = more mediant frequency. When effect is unnecessarily high, remove cap A. optimize the sound is best, and then fix the board with y unit.:: YLY-2088: 400W or lower: 4-16ohmFrequency: Adjustable:As shownMaterial:ABSSize:7x5x2.5cmPackage Contents:2 * Frequency DividerOnly the above package content, other are not included.Note: Light and different displays the or of the item in the a little different from the real . The measurement allowed is +/- 1-3cm.



Misschien vind je dit ook leuk