Yonico Flush Trim Router Bits Patroon Bit Compression Ultra-Performance 1-1/8-inch H X 1/2-inch D Top Lager 1/4-inch Schacht 33209q

all good

Bit stayed sharp and the bearing is still intact and working properly.

Todavía no la uso pero se ve muy robusta

I purchased 2 router bits from these people, the Yonico 33202 Top & Bottom Bearing and the Yonico 33201 Bottom Bearing.On the Yonico 33202 Top & Bottom Bearing.The bottom bearing although fully tightened by the retaining screw was loose on the shaft and was able to rock back and forth significantly. If used this would of destroyed your pattern template and work piece.On the Yonico 33201 Bottom Bearing.The bottom bearing was not flush with the cutters edge, and again if used would of destroyed your pattern template and work piece.Yes, you will be able to return these. But YOU WILL have to pay the postage to do this even though the bits are faulty. YOU WILL NOT get your postage refunded.Good Luck.

I used 2 to do 5 aluminum rims. Had to enlarge the center hub area on some new rims to fit my front locking hubs on a 96 4Runner. They cut and last longer than bits I got from Home Depot and harbor freight.