Zenith Industries ZN700101 Pro bar

Very sharp prying edge, and the tool itself is very heavy and solid feeling. Has taken a beating with a mini sledge to pry out door jambs, flooring and other materials during the demo of our main floor. Pair this with a decent 3' prybar for leverage and a mini sledge, and youve got a good arsenal of demo tools.

Buen producto de calidad ,talmcomo lo rsperaba

Super sturdy and will remove even the oldest trim and baseboards with ease. Just slit the caulking and hammer the edge of the tool into the baseboard. The shape of the tool pulls the baseboard from the wall. Repeat along the wall and the trim will easily pull away.We used it on baseboard that had been nailed below the flooring and heavily glued. Once we pulled it away we had to cut a few nails, but without this tool, it would have been much more difficult to remove.

Bought this tool to remove my baseboards so I could install hardwood flooring. Haven't used this tool a lot yet.Did a test and found that it is very easy to use and does a great job of getting in between the baseboard and drywall without damaging the drywall. Trick is to scour the "gap" between the top of the baseboard and drywall to allow the tool to be inserted when tapping on it with the hammer. Found that once the tool is in, you should slightly pry the bar to create a gap and then slide it done to another area and pry again. Keep doing this until you reach the end of the length of baseboard before prying the baseboard fully. Only issue that I see is that the tool can be short and will not reach any nails at the bottom of the baseboard. Had to use a small pry bar to pry those nails loose otherwise I ran the risk of breaking the baseboard. Outside of this one issue, this tool will let you remove your baseboard with NO damage to the baseboard or drywall if you take your time and if you aren't too aggressive in prying off the baseboard. This will save you from having to spend money and time to replace and install new baseboards.

Conforme à la description