Zigbee 3.0 Smart Switch, geen neutrale draad vereist, SONOFF ZBMINI-L draadloze lichtschakelaar, werkt met Alexa, SmartThings Hub, Philips Hue Bridge, Google Home, SONOFF ZBBridge (1 Stuck）)

De Zigbee Smart Switch is eenvoudig aan te sluiten, maar werkt helaas niet goed samen met mijn Philips Hue-systeem.

If you have a round box on your electrical installation better check the size. Didn't fit mine. Bigger then the ones I use from other brands.

Past niet in een standaard NL inbouwdoos. Kan dus niet achter de schakelaar gemonteerd. Product is vierkantig en de inbouwdozen zijn rond. Gaat net niet.

These are terrific. But:1. They are too large to fit inside British metal back boxes. They will just fit inside at least some plastic ones.2. The relay is quite loud, especially before it’s “worn in”.Otherwise an absolutely terrific part; just wish it was a few mm smaller on all dimensions, at least for us Brits.

Tenia un interruptor al que no le podía pasar neutro y así he podido domotizarlo. Lo he puesto sin la caja exterior, solo la circuiteria por temas de espacio y ningún problema.Además, al ser zigbee, si se deja de funcionar, basta con reconfigurar el hub.

Ho acquistato questo interruttore intelligente principalmente perché mini e quindi è possibile metterlo nella cassetta 503 standard. Istallazione semplicissima, basta seguire lo schema indicato nelle istruzioni e inizia a funzionare immediatamente rispondendo in maniera veloce ai comandi. Lo utilizzo per accendere tramite comandi vocali la luce della mia camera da letto.

I needed a no-neutral solution for a switch. I have z-wave devices everywhere, but z-wave w/o neutral is hard to find and super expensive for the one that I found, so I thought I would give this a shot. As such, this is my first zigbee device that I used and it was easy to pair and setup. I am using a conbee II stick with Home Assistant (via ZHA), and it all "just worked" without issue.Installation is really easy, just identify which side of your cable has power coming in, and which goes to the light and connect to the terminals accordingly. Then just add two pigtails to the switch and connect those to the switch terminals.There are a couple minor complaints: First, the device is a little on the "big" side, or just not well-shaped for US outlet boxes. Technically, the specs say "wall mount", and while I don't know where exactly I would put it on a wall, it's definitely suited for that (and comes with a bracket). I had a single gang box, with a single cable (3 wires) and a paddle switch. It does fit, but there isn't much wiggle room.The second minor complaint is that the little terminal cover plate was a tight fit. Since it slides up, it is a bit difficult to get off because there are 5 tabs that all have to free from the latch. The video shows wedging a screwdriver in and prying it up, which is the only method I could get to work, but I also dug the screwdriver into the plastic and marred the plastic a bit. That is ultimately because I used a flat-head and the edge dug the sharp corner into it. So if you use a phillips head (as in the video), it probably won't do that. It goes in the box, so I don't care about that. Once I got it freed from the bottom, it then got stuck on the seam. Since it is in the box, I decided I didn't need that frustration in my life, so I didn't put it back on.All-in-all, I am very happy with this device, it has worked well for me so far and would definitely consider this again if I have a no-neutral installation need again.

Wir nutzen das Relay zum Einbinden des Spiegelschrankes in unser Hue-Setup im Bad. Schaltet mit dem Hue Motion Sensor perfekt.Die Einrichtung via Sonoff-App hat leider nicht geklappt, wurde aber von der HueBridge direkt gefunden.