Winkelwagen is nog leeg.
Winkelwagen is nog leeg.Productbeschrijving
Kenmerken:
Materiaal: aluminiumlegering
Gemaakt van aluminiumlegering, duurzaam, oppervlak anodische oxidatieproces, vervaagt nooit, goede warmteafvoer
Deze aluminium behuizing heeft een uitlaatgatoppervlak. Het kan een perfecte warmteafvoer bereiken.
Levering:
Behuizing gemaakt van aluminiumlegering x 1pcs
Bevestigingsschroef x 1 set
Koellichaam x 1
Let op: Het Raspberry Pi board is niet inbegrepen.
Antoine
7 augustus 2025
J ai utilisé ce boutier pour un raspberry pi 3b afin de le proteger dans un environnement difficile et le resultat est au rendez vous ! Boitier sobre bien aeré , bien conçu , je le recommande.
mb
21 juni 2025
I bought a pi case prior from these guys, and was replaced with this model now. Total garbage in comparison.Fit is bad, holes aren't fully threaded to even make the case fit tightly, only 1 motherboard peg to hold the pi, and rattles at the usb/ethernet side as it's poorly fitting there too. The indent around the SD card makes it impossible to get the card out without some super fine needle-nose pliers or removing the mobo. Totally hate these, but will keep as hopefully will never open this thing or change the config. Just don't make the same mistake.
Mats
23 januari 2025
Das Gehäuse ist sehr robust, leicht anzubringen und macht einen guten Eindruck. Einzig alleine die Öffnung für die GPIO Kabel könnte ein wenig größer sein, so sind die Kabel schon teilweise leicht gequetscht. Ansonsten super.
Robert Morris
31 december 2024
This is a very smart little case. It is black and sleek, it makes a Raspberry Pi look like a professional but anonymous piece of infrastructure. People wouldn't necessarily guess what the case contains.The kit arrived with fasteners, a little screwdriver and a pair of heatsinks (big and little, both used together for a singe Pi board), which were ready-backed with adhesive. The Raspberry Pi model 3 B+ fits in very nicely and is held down with a screw at one corner. Black countersunk screws hold the top on, and identical screws on the underside hold the base parts of the case together.There are no features on the case for bolting it down to anything. Double-sided foam tape would be the easiest thing to keep it in place, or for a little more security you could just take the Pi out and drill holes in the back of the case.The case has an attractive satin-y anodised finish. I doubt it is especially resistant to scratches, but as delivered it looks seriously nice. All in all I am very happy with my purchase.
Cliente
26 december 2024
Llegó en fecha. Se adapta perfecto para su función. Todo bien.
Aanbevolen producten
