Zoomion RA-motorset, voor Genesis 200 EQ

Ho acquistato questo prodotto nuovo a 84,90€ e mi è arrivato non funzionante, così l'ho restituito ma mi è arrivato un rimborso di solito 67€.... Non mi sembra un venditore serio ..ma più acquisterò da loro...

Habe 6 Monozellen a1,5 V in das Batteriefach gelegt .Mit freudiger Erwartung wollte ich nun das Motorset in betrieb nehmen!! Ohne Erfolg. Netzteil angeschlossen und bei 8,5V Gerät Betriebsbereit.Motor gibt ein Laufgeräusch von sich ,aber es dreht sich nichts. Leider nicht weiter empfehlenswert.

I bought this motor for a non Zoomion mount and was aware that there might be incompatibilities, mainly being the grub screw size and the slow motion control size.It will fit a grub screw of between 10 or 10.5mm - 14mm in diameter. The length of the grub screw is also something to consider as is how far the RA slow motion control sticks out. The RA slow motion control max diameter is 7.5mm this is the size of the hole for the gear any larger than 7.5mm (7.7mm max) will be a very tight fit. One of the slow motion controls the gear was to fit onto, on my mount, needed some filing to get the gear to fit (mount issue) fits nice and snug now with no slippage.A couple of bad things about the motor and control box I have noticed... There is a fair bit of wobble in the motor gear which could cause an issue when tracking if it does slip. The tightening screw is also tiny so can be strpped easily. The tightening screw for the grub is very hard to grasp as it is small and because the motor will have to be released for manual control will be a something that I will look to solve with a piece of wood to make it larger for tightening. The control box stop button is momentary meaning you will have to hold it to stop the motor or turn the motor off to toggle a stop. The reverse x8 takes a couple of seconds to kick in which might be less than ideal.The battery pack is another beast that is archaic in this day and age, it is heavy and the connections are not great, I had to bend one of the copper strips to get a solid connection. I will be purchasing a separate usb to 9v connector to connect power to a power bank for sure, this would be something that might be nice to included in the box but relatively cheap to get one online. It does say Max 9v so the normal 5v USB may work just fine for tracking, but might cap out for x8 speed.I have yet to use the motor for tracking but all seems good so far.

Installation tout à fait facile , la roue crantée est très bien le moteur aussi.La raquette m'a l'air d'être fragile mais bien quand même.Le temps des grosses piles (r14 r20) c'est fini .Je pense qu'une mise à jour du produit en alimentation s'impose .Un boitier avec l'emplacement d'une pile 9v serait bien ou directement dans la raquette .Sinon produit qui fonctionne très bien et mise à jour en alimentation de ma part ( boitier pour pile 9v avec interrupteur ), beaucoup plus esthétique comme ça.

arrivato insieme al telescopio. facilissimo il montaggio, ottimo il movimento del telescopio. grazie Amazon sempre eccellente per la qualità e la puntualità.