Zoomtools 13 stuks 8-32 mm zakgat binnenlager trekker set glijhamer kit voor auto motorfiets

Great tool have used a few times

Very good 👍. Do the job.Perfect.

I got this 13-piece bearing removal set for working on my motorcycle, where I needed to replace worn-out bearings in the rear wheel hub. I had previously used cheap pullers that bent or didn’t fit properly, so I was looking for a professional-grade kit with a wide range of diameters (8–32 mm). I also planned to use it to help a friend who’s restoring an old car, which often involves stubborn blind bearings that are hard to remove.The set came in a durable plastic case, with secure slots for each tool—nothing loose or out of place. All the pullers and slide hammers are made of hardened steel, with no rust or defects. The kit includes multiple adapters, making it easy to fit different bearing sizes. The overall weight feels solid but not too heavy, and the case is easy to carry around the garage.When replacing the 14 mm hub bearing on my bike, I quickly found the right puller. The adapters locked in firmly with no slipping, which let me remove the bearing cleanly, without damaging the seating. I used to rely on makeshift methods like a hammer and chisel—but not anymore.The slide hammer for blind bearings was especially useful when my friend needed to remove a crankshaft bearing from his old car. The tool grabs the inner race, and the impact mechanism pulls it out smoothly—saved us hours of work and frustration.This set worked just as well on small generator bearings (8 mm) as it did on larger hub bearings (28 mm). No need to buy separate tools for different tasks.This bearing removal kit has been well worth it—quality steel, accurate sizing, and a thoughtfully designed case made repairs faster and safer. The slide hammer alone makes it a game-changer—no more risking damage by pounding with a sledgehammer.

A good size set that can extract most commonly used bearings on vehicles and around the home. I wish I'd had this several times in the past where it's been tricky to remove internal bearings - usually resorting to a punch from the other side where possible (with the easy possibility of damaging surfaces) or other dodgy and ineffectual means. This kit makes it so much easier. Choose the insert that just fits into the bearing (some are a little tight), screw in the lock pin and then the handle, and use the weight to tap the bearing out. Great tool.

Absolutely brilliant, easy to use, well made and made to last