ZTE MF833, CAT4/4G USB-dongle, ontgrendelde goedkope reizen, 150 mbps, multibandconfiguratie, met 2 jaar garantie en GRATIS SMARTY SIM-kaart - wit

Very simple to navigate ui. Easy set up note if you do buy this put it in bridge mode as long as u have a mesh styme like decos n get decent speeds speeds vary on location I get easy 300 down n 50-70 up plenty good enough for what I need could get even better speeds. Like said all depends location and for 20 quid can't complane with if you do get it don't use it modern mode as it have less speed then decos that's why said keep in bridge mode as decos give better speed. But over all after trying several different lte. This by fair best IV used ax3000 n was rubbish n X2 as much n other things so yes MC 888 ultra brilliant get one. Trust me

No funcionó nunca

Funktioniert top

Small and smart looking 110x65x18 mm light weight and pocket sized. What looks like the screen is simply a shiny black panel with 4 LED indicators down one side. Came with over 50% charge so was no delay in setting up. Micro sim fits easily in the covered slot on the base. There is a WPS button and an ON/OFF button on the base - both are activated by pushing for 5 seconds. With an activated sim in the router the turn on to internet connection takes only about 30 seconds. I dumped the DATA only SMARTY sim and used one I already own. The passwords for wifi and router access are on the label on the back - I used my PC to access the setup in USB mode - 192.168.0.1 and enter the router password - once into the admin page changed router password, wifi password and SSID. WIFI can be turned off if USB mode only is needed. In my front room at peak times I get around 8 Mb/s download over USB - with the router in an upstairs window and with the shiny black panel pointed at the cell tower I get between 20 and 35Mb/s download over the 2.4Ghz wifi.I don't know how long a battery charge lasts but is stated at 10 hours - time will tell.Only negative points so far are the shape - it is not so good for standing on its base and can't be stood on its base with USB cable attached - I 3D printed a stand in PETG that I found on thingiverse which acts as a stable stand with USB access and easy orientation towards a cell tower. (search ZTE)Not sure how many wifi devices can be attached to the router as I only use one PC with wifi.For the money this little USB modem router is very goodOne thing to be aware of - if using Windows 11 or 10 in USB mode the device loads software onto your PC - I found this to be a problem so restored my W11 PC and now only use the wifi to connect.In Linux Mint the device works in USB mode with no issues.

CONTENTE DE MON ACHAT FONCTIONNE PARFAITEMENT