Zware Belasting 2-13 mm 1/2-20 UNF Sleutelloze Boorhouder Met SDS-adapter, Professioneel Converteren Hardware Gereedschap

I used a washer plate of approx. 5mm thick and made it to fit at the back of this tool. Now the backend will not come off as described in other reviews.

Summary:I recieved it, and was cautious about the quality and durablity of the chuck, however this was quickly dismissed as I used it, first time using it was with a mac allister 6.8kg sds-plus drill with 10mm spaded tile drill bits.I ensured it was drill only mode and got to work. The chuck is keyless and knurled for a twist tighten mechanism, this works well, but will unchuck itself should a bit stall or get caught. I like that it unchucks itself instead of destroying the drill bit or twisting the drill.I recommend finding bits that have hex shanks or triangle ground shanks, this will provide a dramatic reduction of bits getting caught and unchucking themselves unnecessarily.Dont be that guy that uses hammer mode with this chuck. It's absolutely not designed for it, but that's not a problem as most non sds bits would get destroyed by an sds hammer action.Because its a keyless chuck and had an sds shank, its super easy to use. Pull the sds chuck mechanism down and slot it in, it's that simple.So far I've used tile drill bits, wood bits and metal bits (all designed for regular drills) with great results, the lower drilling speeds of sds drills means the bits last longer and stay sharper for longer.In all of those uses the chuck handled the bits and sds perfectly, unlike some of the other reviews(I suspect they all used it with rotary hammer mode)To address some of the concerns about quality:The shank was secured to the chuck tightly and has remained tight after use.After many hours of use in drilling, the chuck is still in the same new condition it was when I recieved and I expect it will hold up to the stress and strains in the futureI hope this helps you all.Note: I will be adding to my review over the next 3 to 6 months to provide you all with a long term review.

A voir à l'usage mais parait plus solide que celui fourni d'origine

molto maneggevole e robusto

Es buena y de buena calidad, pero en el primer uso se ha roto la parte trasera, la pieza que cubre el engranaje de color negra

Der Anwender ist sehr zufrieden und von der Qualität überzeugt.