9-delig pijpfelsgereedschap Remleidingfelsysteem Remleidingfelsysteem Gereedschap Set dubbele felsgereedschap voor stijve koperen remleidingen Expander Pijpruimer Felsgereedschapset

Features:
This tool kit was specially developed for flaring pipes and can be used to make single or double extensions.
The clamp is specially made with a stronger clamping force and ensures little deformation of the pipe.
The edge of the pipe end widened with this tool is smooth and does not break easily after prolonged use.
The flaring tool kit is a convenient way to make a horn shape on one end of a pipe or tube. It is widely used to flare copper, brass or thin-walled aluminum pipes.
All parts are neatly packed in a storage case for easy transport.

Specifications:
Material: 45 # steel
Color: As shown
Flare dies size: 1/2 inch, 6mm, 4.75mm, 5mm, 1/4 inch, 8mm, 10mm
Clamp size: 12.5 x 8.2 cm / 4.9 '' x 3.2 ''
Carrying bag size: 21 x 13.5 x 2.7 cm / 8.3 '' x 5.3 '' x 1 ''
Used on: copper, brass or thin-walled aluminum pipes etc.
Package weight: Approx. 1.022 kg

Instruction:
1. Clean the end of the pipe.
2. Insert the tube from the bottom of the clamp until the edge at the top is even.
3. Slide the ratchet cone into the clamp and align the arrow with the marking.
4. Tighten the side T-bar.
5. Turn the cone drive screw down until you hear the coupling click.
6. Loosen the cone drive screw and the side T-bar. Remove from the clamp. And take the tube off.

Package included:
1 x clamp
1 x spreader
7 x Double Flare Dies
1 x storage case