Winkelwagentje

Winkelwagen is nog leeg.

Winkelwagen is nog leeg.
Op voorraad

Berger ArboRapid 5430 rupsschaar voor het snijden van takken en takken, opzetstuk voor telescoopstangen

42,99€ 105,13€
Gratis verzending bij bestellingen boven 25,99€

Productdetails

  • Berger ArboRapid rupsschaar - geschikt voor alle ArboRapid telescoopstangen
  • Voor het snijden van hoge takken, bomen en struiken tot Ø 4 cm, snelle en eenvoudige bevestiging aan de telescoopstang dankzij innovatief kliksysteem
  • Krachtbesparend: met speciale extra wielen voor een optimale, 3-voudige krachtoverbrenging en lichte, schone sneden
  • Incl. 5 m trekkoord; naar boven snijden; solide metalen behuizing; corrosiebestendig
  • Made in Germany – met VPA GS-keurmerk voor geteste veiligheid


Productbeschrijving


Berger Tools
Berger ArboRapid

Berger ArboRapid telescoopstangsysteem.

Berger ArboRapid is een kliksysteem voor telescoopstangen, waardoor je de opzetstukken zonder gereedschap kunt verwisselen. Vervelend schroeven is niet nodig. De telescoopstangen hebben een lengte van slechts 1,75 m – ze kunnen dus probleemloos worden vervoerd. Andere voordelen van het systeem: De buizen van corrosiebestendig aluminium zorgen ervoor dat de stang ook in volledige lengte stabiel blijft. Zaagbladen kunnen onafhankelijk van de deuk worden vervangen. Met de veiligheidshendels kan de telescoopstang op elke gewenste hoogte worden ingesteld.

Of het nu gaat om een opzetzaag, universele haak of rupscharen, het ArboRapid-systeem biedt voor elke taak het juiste gereedschap.

Met de Rocket Master is ArboRapid zelfs geschikt als werpcentrifuge.

Aanbevolen door professionals – met KWF-professioneel zegel.

Berger smederij

Made in Wuppertal-Cronenberg.

Onze locatie in de Bergische stedendriehoek Wuppertal – Solingen – Remscheid is wereldwijd bekend om veeleisende smeedtechniek en slijptechnologie.

Traditie en innovatie zijn kenmerken van ons familiebedrijf. 100 jaar ervaring in de productie van snij- en nieuwste technologieën in de verwerking.

Berger Gereedschap

Berger – traditie sinds 1919.

Het in 1919 opgerichte bedrijf wordt inmiddels in de vierde generatie familiegeleid

90% van het brede gereedschapssortiment wordt geproduceerd in het eigen bedrijf in Wuppertal.

Berger is altijd het gehele productieproces en de kwaliteitscontrole onder één dak direct ter plaatse in Wuppertal.

Berger Gereedschap

Technologie staat bij Berger centraal.

De Berger productietechnologie staat voor hoogwaardige snijgereedschappen met technische allesinstellingskenmerken, bovengemiddelde levensduur en directe beschikbaarheid van reserveonderdelen.

De productportfolio is GS- en Kwf-getest en bestaat uit hand-, tak, heggen- en vormsnijscharen, telescoopstangensystemen, evenals koker- en klapzagen.

Berger testwinnaar

Topmerk Garten 2019/KWF-Profi

In de huidige eindgebruiker enquête van TestBild besloten BERGER de 1. Ruimte in de categorie duurzaamheid bij hand-, tast- en heggenscharen en zagen. De prijs voor het topmerk Garten 2019 weerspiegelt ook de populariteit van het merk Berger bij tuinliefhebbers.

Aanbevolen door een professional - met KWF-professioneel zegel!


Malte Kluetz
2 augustus 2025
The telescopic pole is the key. Sturdy aluminum adjustable pole. You get to all branches easily.Convenient click on system for telescopic pole.The three level ratchet allows cuts of up to 2 inches.Get the pruner and the saw.I highly recommend the Berger tool system!
Franck
15 mei 2025
Très bon matériel très bonne coupe
Christoph
14 april 2025
Macht, was es soll. Gut verarbeitet. Nach 3 Jahren intensivem Einsatz dieses Folgemodell beschafft.
Mr J
12 januari 2025
I have two quite large apple trees in my garden that I am trying to control otherwise I will need to employ an expensive tree surgeon to really trim them back in the future.Some time ago I invested in the Silky extendable pole saw with the lopper attachment and recently I replaced the lopper attachment with an Hyauchi lopper that fits exactly into that system and I regret that did this as it did not perform as expected.The problem is that if one switches brand then there is always the risk that say Berger attachment will not fit the Silky system so I took a chance and thought perhaps I can adapt-I took off the lower shaft of the Berger attachment fixed by nut and bolts and disassembled the Silky one (drilled out the rivets) and now I have a fit.The Berger attachment is made in Germany so I would expect it to be of good quality steel and assembled well with no need for adjustment-I am fairly happy but none of these attachments will handle a branch of 4 cms diameter at the end of a long pole that bends slightly and a pull cord using one hand.My apple trees might be tough but it cannot handle a branch beyond 3 cms diameter. With all these attachments one needs to ensure that the blade is coming on to the cut at 90 degrees rather than at an angle and if the blade does get stuck dont heave pull and shove too much to try to release otherwise the blade assembly nut will become stressed.The Berger attachment is probably one of the best on offer but a little more expensive than Silky. If you have another pole system other than Berger beware that you might or might not be able to adapt one system to the other with any success-I found that the Berger lower shaft will accommodate a circular shape end of pole into it whereas the Silky is more elliptical in shape hence why I had to take each apart and adapt.
JLV94
10 januari 2025
J'en suis à mon 3eme echenilloir.Je ne regrette pas mon achat le tarif vaut la qualité.J'ai coupé des branches de gris diamètre comme indiqué sans forcer.Je recommande cet achat et avec la perche prévue ce doit être encore mieux.