Winkelwagentje

Winkelwagen is nog leeg.

Winkelwagen is nog leeg.
Op voorraad

Bosch Professional 2609390034 Zeskantcontactadapter 5/8'-18 Unf, 32-210 Mm

6,99€ 13,19€
Gratis verzending bij bestellingen boven 25,99€

Productdetails

  • Geschikt voor alle gesnoerde en accu boor-/schroefmachines


Productbeschrijving


Onze geschiedenis

robert bosch

Het verhaal van ons succes

In 1886 stichtte Robert Bosch de "Werkplaats voor fijne mechaniek en elektrotechniek" in Stuttgart. Dit was de geboorte van het wereldwijd werkende bedrijf dat het nu is. Al vanaf het begin werd het gekenmerkt door innovatieve kracht en sociale betrokkenheid.

Producten en diensten die enthousiasme wekken

mobiliteit bosch

Mobiliteit

Met zijn uitgebreide technische kennis ontwikkelt Bosch slimme mobiliteitsoplossingen op het gebied van hardware, software en diensten.

bosch thuis

Thuis

Bosch biedt u individuele oplossingen voor uw huis om het leven elke dag een beetje gemakkelijker te maken.

bosch industrie handel

Industrie en handel

Bosch biedt innovatieve producten en diensten voor industrie en handel.


D
3 augustus 2025
Works well with Bosch holesaw attachments. Note the Bosch adapter is NOT compatible with some more generic holesaw attachments.
kaushik basu
1 mei 2025
It's a Bosch product. Nice and heavy finished product. Hope will work fine.
Ltc044
21 februari 2025
Molto robusto e preciso; la.sega a tazza si avvita fino a far combaciare a fine corsa i due fori con i due perni di bloccaggio dopo di che si fa risalire la ghiera del perno. Bloccaggio molto solido. Attenzione a scegliere lo strumento adatto per la sega a tazza perché ci sono più vetsioni e quella suggerita da Anazon può essere non quella giusta (capitato a me ho dovuto fate un reso ed ordinare questa qua). Per essere sicuri guardare il numero di prodotto della confezione della sega a tazza.
Shamashemo
16 februari 2025
Original heavy duty
Ian T
26 januari 2025
Never used one of these before but needed one and a cutter to finish off a kitchen workbench. Be aware there are no instructions so you just have to work it out. Need a hex key to adjust the drill to the right length so it is longer than the cutter drum to make your starter hole. Also be careful not to remove the grub screw that fastens in the locking device Minto the top of the cutter, its very small and I was lucky to find it again! You only need one of these for cutters from 32 to 210 mm.
juan carlos CASTILLO
23 januari 2025
calidad y precio