Winkelwagen is nog leeg.
Winkelwagen is nog leeg. Beschrijving
De PCIe x1 RTL8125B Dual-Port 2.5G netwerkadapter wordt gerealiseerd door de combinatie van meerdere chips, het combineert een vier-speed IEEE802.3 compatibele Media Access controller met een vier-speed Ethernet-transceiver, het voldoet aan de IEEE802.3u specificatie voor 10/100Mbps Ethernet, de IEEE802.3ab specificatie voor 10 00Mbps Ethernet en IEEE802.3bz specificatie voor 2500Mbps Ethernet. Het biedt ook high-speed transmissie via CAT5e UTP kabel OF CAT3 UTP (10Mbps slechts) kabel .it is geschikt voor meerdere marktsegmenten en opkomende toepassingen, zoals desktop, werkstation, server, communicatie platforms, en embedded toepassingen.
Specificatie
Chipset: RTL8125B+ASM1806
Ondersteuning PCI Express Specificatie Revisie 2.1
PCI Express-interface: X1
Geïntegreerde 10M BASE-Te en 100/1000M/2.5G base-T 802.3 compatibele zendontvanger
Ondersteunt 2.5G en 1G Lite-modus
Automatische onderhandeling met uitgebreide volgende pagina mogelijkheid (XNP)
Ondersteunt paarswap/polariteit/skew-correctie
Crossover-detectie en automatische correctie
Ondersteunt 1-Lane 2.5/5Gbps PCI Express Bus
Ondersteunt hardware ECC (foutcorrectiecode) functie
Ondersteunt hardware-CRC (cyclische redundantiecontrole) functie
Ondersteunt PCI MSI (Message Signaled Interrupt) en MSI-X
Transmit/ontvang ondersteuning op de chip buffer
Ondersteunt ECMA-393 ProxZzzy Standard voor slapende gastheren
Compatibel met IEEE802.3, IEEE802.3u, IEEE802.3ab
Ondersteunt IEEE1588v1, IEEE1588v2, IEEE80.2AS tijdsynchronisatie
Ondersteunt IEEE802.1Qav op krediet gebaseerd shaper-algoritme
Ondersteunt IEEE802.1P Layer 2 Priority-codering
Ondersteunt IEEE802.1Q VLan-tagging
Ondersteunt IEEE802.1ad Dubbel VLAN
Ondersteunt IEEE802.3az (energie-efficiënt Ethernet)
Ondersteunt IEEE802.3bz (2.5GBase-T)
Ondersteunt volledige duplex stroomregeling (IEEE802.3x)
Ondersteunt jumbo frame tot 16K bytes
Ondersteunt wachtrij voor virtuele machines (VMQ)
Ondersteunt quad-core ontvangen - zijschalen (RSS)
Ondersteunt Protocol Offload (ARP&NS)
Drivers voor Vista /Win7/Win8/Win10/Win11/Sever2008/Sever 2012/Linux/DOS
Inhoud van het pakket
1 x PCIe x1 RTL8125B 2.5G-netwerkadapter met twee poorten
1 x Gebruikershandleiding
1 x CD
1 x Laag profiel beugel
Bohdan Khomutskyi
13 juli 2025
The network card does not require any drivers in Proxmox. Just plug and play.Apart from RTL8125BG, there is ASM1182e PCIe 2.0 switch, which doubles the number of x1 lines. The theoretical bandwidth is enough to support both ports running at the same time without the slowdown.The card fits well in the first slot of my motherboard --- single slot height allows it.
PC_Junkie_17
3 juni 2025
This device is plug and Play when it comes to Windows 10 or higher. I have not tested this device on any Windows operating system prior to Windows 10. This device has been tested on Linux as well and it works perfectly fine and is detected in Linux. I have also tested this on PF sense and open sense and this network card works on both. This network card has also been tested with proxmox virtualization environment system OS and the card is detected as well. I do not believe that you would be able to have one Ethernet Jack go to 1 VM and the second ethernet Jack going to another VM but I can't say for certain as I have not tested it yet. Once I have additional equipment I will be doing additional testing. Please note: I have not been able to fully test the throughput of this device as this is the only device that I have that is a 2.5 gigabit speed. However, based on gigabit speed which is what I currently have in my house, this device performs perfectly on one gigabit speed. Will need to conduct additional testing once I upgrade to 2.5 gigabit speed in order to fully compare and finish this review. Once I have the router /switch that can do 2.5 gigabit speeds. I will update this review with my findings.
Andre R.
16 maart 2025
In meinem Proxmox Server eingebaut, die Netzwerkeinstellungen angepasst und läuft nun seit Wochen ohne Ausfall, kann ich empfehlen.
annihilatorg
7 maart 2025
Very poor thermal design. The heatsink hits not 1, not 2, but 5 passive components. FIVE. (big yellow cap on the bottom-left, some dip-8 packaged transistor in the top left, and 3 tall SMT resistors) These passive components are taller than the IC that the heatsink is supposed to cool, so the heatsink doesn't sit flat on the actual heat-generating part. I don't know if the original cooling may have been "fine" as I did a small mod to the heatsink and used a taller thermal-pad to sink the main IC. When installed, the NIC worked fine to transfer nearly a terabyte of mixed small and large file data between two Truenas systems.
Brando
18 december 2024
Used this for TrueNAS core and it works great. You do need to enable the kernel module in tuneables. I have yet to have any issues with the included driver in TrueNAS core and only needed to enable the tuneable which I will include below as I have seen this be asked quite a bit online:Variable = if_re_loadValue = yesType = loaderRunning TrueNAS-13.0-U6
Aanbevolen producten
Aanbieding
6,99€
16,28€
Aanbieding
4,99€
10,82€
Misschien vind je dit ook leuk
Aanbieding
51,99€
129,00€
Aanbieding
7,99€
14,99€