Echte Dualit Mi7 Run Back Type Toaster Timer

Our old timer had got sticky and erratic, this one was simple to fit and works great. The toaster is now useable again.

Habe damit meinen Dualit-Toaster wieder problemlos zum Laufen bekommen. Es handelt sich um das Original-Teil.

Great genuine part

Fits the toaster as expected. Easy to replace as it is a like for like replacement. Only tools required are a Philips screwdriver and possibly a pair of long nose pliers. Remove power plug from socket. Remove the four screws that attach the feet. Remove the last two screws that will be securing the base. Remove the base plate. Pull the timer dial off the timer spindle. Remove the two screws that hold the timer in place. Gently push timer in to toaster housing making sure not to dislodge any cables. Gently pull the timer switch downwards. Remove the spade fittings one at a time, swapping them securely on to the new timer switch as you go. Doing them one at a time ensures you won't make a mistake when you are swapping the wires. If in doubt, take a photo of the connections before you start. Once all four connections have been made, return the new timer to the correct location using the original two screws to hold it in place. Put the base back on and test! A very simple job. You may find the spade connectors a little tight - this is as designed. Use the long nose pliers to help remove and reattach. Note - if any of the wires or spade connectors look blackened or burnt, get a qualified sparky to replace. Do not use the toaster until any burnt internal parts are replaced.

What can I say, you buy an orginal part and it works. Delivery as promised from UK. LOVE this toaster.