Gatemate 1490096 Euro P11 lange gooi dubbel slot, zwart/roestvrij staal, 70 mm

Zeer snelle levering. Oerdegelijk slot. Lang gezocht naar een dergelijk slot. Maar dit is 'm! Zeker aan te bevelen.

This is the best gate lock on the market! I am truly impressed.Installation was a breeze, with clear instructions, stick-on templates for holes and even the necessary drill bits needed.The gate lock has a hefty weight and the quality of the materials used is obvious when you get your hands on it. The operation of the lock is buttery smooth and effortless. The design is excellent. Everything comes together beautifully to give a truly sturdy lock which will be sure to stop a potential intruder.Highly recommend this extremely high quality lock. Excellent value for what you get for your money and cheap piece of mind!

This is a brilliant lock it's very well made and has everything you need, drill bit, pilot drill and hex bit. the stick on template make it so easy. I had to add some plywood to the back of the shed door to build it up and make the door stronger and the whole job only took about an hour.

Love this lock. Easy to install and gives me piece of mind when I’m away that access to the yard has been secured.

In the box you'll find the following:Lock assembly5 keysLock keep8qty, T30 anti-tamper security screwsT30 Security screw bit driver2qty PH1 no3 stainless screws19mm wood drill bit (useless)4.5mm general drill bit (not sure what for)Chrome plated escutcheon2 self adhesive drill templatesFixing instructionsLock dimensions:Lock barrel length from housing backplate (max gate thickness 74mm)Bolt throw RH mounting 81mmBolt throw LH mounting 84mmNow the lock feels substantial, with its 18mm square bolt and the black powder coated housing and lock keep, both equally as heavy duty.Installation is relatively painless, after modifying my gate by adding a block of white oak to carry the new lock, the first thing I noticed, the self adhesive template struggled to stick to a soggy, rough sawn garden gate, nevertheless a bit of gaffa tape later I started to drill the two required 19mm holes that the lock goes through.Once drilled I moved onto mounting the lock, now it's worth mentioning that, as with most pressure treated wood, it's soft, with that the instructions called for me to drill the holes with a 3.5mm drill bit, yet the one enclosed was a 4.5mm, regardless that predrilled holes would only later weaken the screws grip of the gate timber I just sent the screws straight in, even the ones that went into the bone dry oak, with the use of a 9yo cordless drill, sank in without hesitation.The lock keep has a plastic insert with a sprung tab that is there to minimize gate rattle in high winds and looks like it should be OK in the long run, just make sure in installation that it's the correct way round before fastening down as the lock bolt will not fully lock if it's the wrong way.I had added some red grease to my lock just to help it in the long run, the lock barrel is a bespoke type and unlike common lock barrels that have a cam which turns with a key, this barrel uses a sprocket that drives the pin via its predrilled holes (as seen from underneath the bolt) this type of barrel is not a common variety on the market so would probably be hard to source.I did like the included anti-tamper screws (as I planned to use coach bolts, and may still swap two out later on the lock) but both of the drill bits included were a waste of time as the 19mm one bent while drilling the first hole, and had I used the enclosed 4.5mm drill bit, they would have opened the mounting holes too much and resulted in remounting the lock a second time leaving holes all over the place.Ive still rated it as a 5 star as the product is better than I expected and I would buy either this one again or another from this range now, granted the included drill bits were a bit useless but using my own wasn't a deal breaker as I already expected to use my own.Ease of installation 5*Instructions 4*Delivery 5*Build quality 5*Accessories 2*