Winkelwagentje

Winkelwagen is nog leeg.

Winkelwagen is nog leeg.
Op voorraad

Inateck Externe harde schijf behuizing 3,5 inch USB 3.0 externe harde schijf/SSD behuizing van aluminium voor harde schijf 3,5/2,5 SATA

15,99€ 35,66€
Gratis verzending bij bestellingen boven 25,99€

Productdetails

  • 3.5 Harde-schijfbehuizing: Superspeed USB 3.0-verbindingen tot 5 Gbps; Ingebouwde ASM1153E-chipset ondersteunt SATA III met tot 6 Gbps Signaalbandbreedte voor extra snelle back-ups; Ondersteuning UASP gericht op SSD.
  • Compatibiliteit met Windows XP/Vista/7/8/8.1/10, Linux/Android, Mac OS 10.3 en hoger. Ondersteunt alle standaard 2,5/3,5 inch SATA I/II/III-schijven (maximaal 10 TB); Achterwaarts compatibel met USB 2.0/1.1-verbindingen.
  • Binnenlaag van glad en antislip PU-leer, bescherming tegen krassen.
  • Het duurzame materiaal van aluminiumlegering belooft ultralichte draagbaarheid en voortreffelijk vakmanschap; Uitgerust met zeer effectieve warmteafvoer; antislip rubberen pads op alle vier de hoeken; Twee LED's geven de stroomstatus (groen) en de activiteitsstatus (blauw) aan.
  • Plug en Play; Hot-swap, geen herstart of extra stuurprogramma's nodig; 12V/2A voedingsadapter zorgt voor een stabiele stroomvoorziening.


Productbeschrijving


A
A

Accelerate Your Backup with Turbo Speed

FE3001 connects your HDD to your PC via Superspeed USB 3.0. The built-in top-grade Jmicron ASM1153E chipset not only supports UASP (USB Attached SCSI Protocol) with a faster data transfer rate targeted for SSD, but also supports Serial ATA bus up to 6Gbps Signal bandwidth for even faster data backups - the possibilities are endless.

High Compatibility

FE3001 shows high compatibility with operating system environments Windows XP/Vista/7/8/8.1/10, Linux/Android, Mac OS. It supports all standard 2.5"/3.5" SATA I/II/III drives up to any capacity (up to 10TB Max). Downward compatible with USB 2.0/1.1 connections.

Back Up Your Stuff Anytime, Anywhere

FE3001 requires no reboot operation and no additional drives installation during the use. It goes anywhere - without getting in your way.

Durable and Sturdy

Made of Aluminum-alloy material, FE3001 is featured with an effective heat dissipation besides its ultra-light portability and exquisite craftmanship. The non-slipping rubber pads on the four corners of the case promise provide safety on every surface.

Designed with You in Mind

The 12V/2A power adapter provides a stable power supply. The individual green and blue LED lights represent power and activity status. The useful accessories bag plus rubber pads and screws round up the whole package.

Please note: The PCB plate must be fixed, otherwise they will rock.

A

Open de schaal

Verwijder de schroeven en schuif de harde-schijflade uit de behuizing.

A

Harde schijf installeren

Gebruik de meegeleverde schroevendraaier en sluit je SATA SSD/HDD aan op de SATA-connector.

A

Externe shell installeren

Schuif de harde-schijflade terug in de behuizing en draai 2 schroeven in de montagegaten van de harde-schijflade aan de zijkant van de behuizing.


H.A. Post
23 mei 2025
Does what it's made for.
Jos
8 mei 2025
Buy this Harddisk Case. The case is (1) SOLID, you get some nice screws etc. (2) has an on/off SWITCH which can stay 'on' in case of a power failure (some cases have a BUTTON which you need to press after a failure) (3) Directly plug en play with Linux/Ubuntu + BTRFS.
Silver
29 maart 2025
Este muy bien, viene muy bien embalado y con muchos tornillos para colocar cualquier disco duro. Funciona muy bien y de momento no nos ha dado ningun problema. Es muy rapido. Tiene interruptor de apagado muy útil para apagarlo cuando no se usa y evitar recalentamientos.
Ant31
5 maart 2025
BonjourJ'ai acheté ce boitier pour mettre un disque dur de 8 To .J'ai mis cinq étoiles par rapport à ce qu'il est facile à monter, facile d''utilisation et facile à installer.Par contre je suis en USB 3.2 branché sur mon ordinateur et sur certain dossiers je suis à moins de un Mo alors que sur d'autre dossiers je suis sur des débits correcte.Je ne sait pas si cela vient du disque dur ou du boitier puisque les mêmes dossiers branché en USB 3.2 avec un SSD branché en direct avec un adaptateur sans alimentation passe comme une lettre à la poste.Sinon dans l'ensemble je n'ai pas de problème, juste une remarque c'est que le disque on ne peut pas le fixer sur sa longueur mais juste les deux vis de chaque côté ou il y a les connecteurs. Comme il est à plat cela ne pose pas de problème
Customer
24 februari 2025
Metalowa obudowa dobrze przewodzi ciepło, jeśli używasz stacjonarnie wcale nie musisz zakładać obudowy wtedy dysk jest jeszcze lepiej chłodzony. Przód i tył z plastiku odkręcany. Przy długim kopiowaniu proponuję dostawić jakiś wentylatorek. Skopiowałem bez zająknięcia ~8TB danych. Dysk jest mocowany do szuflady dwoma śrubkami dołączonymi w komplecie, montaż całości bardzo prosty. Dysk 2.5" też montowany bez problemu. Najważniejsze, że czyta w pełni SMART na Linuxie. Zapis z pełną prędkością dysku HDD 3,5". Dodatkowo w zapasie śrubki do dysku i obudowy oraz dwie piankowe samolepne nóżki. Całość solidnie wykonana jak na tę cenę.Na pewno kupię ponownie.
Jocke W
1 december 2024
No issues. Mounted HDD easily. Working as expected. Noted some connection glitch on computer side of cable. Not sure if it's the cable or connector in computer.
Ein Verbraucher
20 oktober 2024
Ich habe mir dieses Inateck-Gehäuse gekauft, nachdem ich schlechte Erfahrungen mit einem vor 5 Tagen gekauften Gehäuse eines anderen Herstellers gemacht habe:"CSL - 3,5 Zoll Festplattengehäuse USB 3.2 Gen1 Super Speed Aluminium HDD - Festplatten-Gehäuse für SATA I II III - Optik Alu gebürtstet - kompatibel zu USB 2.0 - extern - schwarz".Ich benötige das Gehäuse für meine neue "Seagate IronWolf 8 TB Festplatte, Modellnr.: ST8000VNZ04". Ziel: eine neue große externe Festplatte für Backups.Das CSL-Gehäuse ist nicht wertig. Die Festplatte wird da nur auf den Controller gesteckt und alles sitzt wackelig im Gehäuse. Außerdem machte das CSL-Gehäuse Probleme: Es war nach 30 min - 3 Stunden nicht mehr nutzbar und musste hart aus- und eingeschaltet werden, um wieder auf die Festplatte zugreifen zu können. --> Das CSL-Gehäuse geht als "defekt" an Amazon zurück.Mit dem neuen Gehäuse von Inateck funktioniert die 8TB Seagate Festplatte einwandfrei. Sie ist auch nach Stunden noch ansprechbar, Backups können erfolgreich geschrieben und gelesen werden. Ich habe sie mittels "h2testw.exe" getestet: Schreiben und Lesen von 1 TB funktionierte fehlerfrei. Mehr habe ich aus Zeitgründen nicht getestet, das genügte mir schon als Indiz: an der Festplatte lagen die vorher festgestellten Probleme nicht, es muss am Gehäuse/Controller gelegen haben.Die Festplatte schaltet erfolgreich in den Energiesparmodus und wacht auch sofort wieder auf, sobald ich im Windows-Explorer draufschaue. Funktion: 100% zuverlässig.Im Vergleich zum frickeligen CSL-Gehäuse gefällt mir am Inatek-Gehäuse mir viel besser: Die Festplatte wird mit 2 Schrauben fest mit dem Controller verschraubt. Dadurch sitzt alles stabil im Alugehäuse. Macht einen viel wertigeren Eindruck!Fazit: Ich behalte das Inateck-Gehäuse.