Winkelwagentje

Winkelwagen is nog leeg.

Winkelwagen is nog leeg.
Op voorraad

Inateck RGB harde schijf dockingstation USB 3.0 met offline kloonfunctie, voor 2,5 en 3,5 inch SATA HDD's en SSD's, UASP ondersteund, zwart

19,99€ 42,99€
Gratis verzending bij bestellingen boven 25,99€

1.Stijlnaam:Usb A-poort


Productdetails

  • [RGB-effect]: de RGB-led knippert snel wanneer er een harde schijf in het dockingstation zit en knippert langzaam wanneer de harde schijf in slaapstand staat of wordt verwijderd.
  • [Offline kloonfunctie]: het dockingstation kan harde schijven onafhankelijk van de computer klonen.
  • [Snelle overdrachtssnelheid]: naast de USB 3.0-snelheid ondersteunt het dockingstation UASP, wat een nog snellere gegevensoverdracht mogelijk maakt. Geen driver nodig, plug-and-play.
  • [Brede compatibiliteit]: ondersteunt tot 2 x 20 TB harde schijven. Het product is compatibel met bijna alle soorten 2,5 inch en 3,5 inch HDD's en SSD's op de markt.
  • [Inhoud van de verpakking]: 1 x Inateck SA02003 dockingstation, 1 x handleiding, 1 x 12/3A voeding, 1 x USB 3.0 datakabel


Productbeschrijving


Prestatieken

- Ondersteunt offline klonen, geen drivers nodig, eenvoudige installatie

- Ondersteunt 2 x 10 TB harde schijven; ondersteunt 2,5 inch & 3,5 inch SATA (SATA I/II/III) HDD en SSD

- Uitgerust met USB 3.0; ondersteunt SATA III (5 Gbit/s) en UASP voor optimale prestaties

- Compatibele systemen: Windows Vista/7/8/10, Mac OS 9.1/10.8.4 of hoger

- Rustmodus na 30 minuten stationair

RGB-functie

Het dockingstation is uitgerust met een RGB-led die de bedrijfsstatus nauwkeurig weergeeft.

De RGB-LED knippert snel wanneer een harde schijf zich in het dockingstation bevindt en knippert langzaam wanneer de harde schijf in slaapstand bevindt of verwijderd wordt.

Ondersteunt UASP en SATA 5 Gbit/s

- De UASP Transfer Protocol kan alleen de lees- en schrijfsnelheid van SSD-harde schijven versnellen

HDD/SSD offline klonen

Houd de offline belknop 3 seconden lang ingedrukt, het led-display dat de voortgang van de klonen 100% weergeeft, brandt op.

Druk vervolgens opnieuw op de knop terwijl de 100% led brandt en de offline klonfunctie start.

4 led-indicatoren knipperen en lichten achtereenvolgens op om de voortgang van het klonen van 25% -50% -75% -100% te markeren.

Als de offline klon voor 100% is voltooid, branden alle 4 ledlampen op tot het apparaat wordt uitgeschakeld.

Let op:

- De doelharde schijf moet groter zijn dan de bronplaat.

- Zorg voor het klonen van de bestanden op de doelharde schijf. Alle bestanden op de vaste schijf worden overschreven.

- Zorg ervoor dat er geen defecte sector op de gebruikte stations aanwezig zijn, om gegevensoverdrachtsfouten, oververhitting en schade aan het station te voorkomen.

- Verwijder ook de tweede schijf niet en plaats geen nieuwe schijf in de andere sleuf als de andere

De drive is toegankelijk om gegevensverlies te voorkomen. Schakel het dockingstation voor de veiligheid uit als je een schijf verwijdert.


Frans
28 april 2025
Doet waar ik het voor gekocht heb.Betaalbaar.Effectief.
Sasa Jovanovic
21 maart 2025
Bra och smidig HD-läsare!
José César Fernández
26 februari 2025
Me interesaba una estación que permitiera un clonado de discos.Como unidad USB externa funciona muy bien. Gran velocidad. (En mi equipo ronda los 100MB/s con archivos grandes, pero no es representativo. La velocidad está limitado por el cuello de botella del NAS a través de la red, por lo que puede ser más... dependiendo del disco.)Se pueden usar dos discos a la vez, aunque este es un punto complicado. No recomiendo hacerlo porque el montaje de unidades y la extracción hay que gestionarlas perfectamente para evitar accidentes. (Sacar el disco que no es, hacerlo antes de tiempo o meter un disco mientras el otro está funcionando puede ser una potencial fuente de problemas.)El uso como clonador muy bien. Rápido y más eficaz que otras opciones. Ya advierten otros usuarios que NO se puede clonar un disco mayor sobre uno más pequeño. Tiene que ser, al menos, sobre uno igual o más grande. Aunque el original no contenga casi datos. Tiene lógica, esto no es una copia de archivos. Es una copia sector a sector del disco y la estación de acoplamiento no comprende los sistemas de archivo NTFS, btrfs, ext4, exfat, ZFS o lo que sea... Es imposible redimensionarlos al vuelo. Pero tiene mucha aplicación. Yo administro un montón de equipos iguales para aulas y para este trabajo es muy práctico.Como punto algo negativo es bastante grande en el escritorio y las luces de colores me da un poco igual :-D Pero tampoco es algo que moleste. En fin, un equipo interesante.
pflower
24 februari 2025
I bought a slightly earlier version of this in 2017 and have used it daily and continuously with 2 6tb drives as my main storage and backup for my photos. The original has been running 24/7 for 4 years without a hiccup. I just bought a 2nd one and now have 4 6tb drives attached. The cloning feature is possibly a bit clunky.- normally I backup by using SuperDuper on a Mac through the docking station from the main drive to the backup - but with the new one I thought I'd try the cloning option. Cloning a 4tb to a new 6tb drive was very slow - but it worked.For the price this is extraordinary - With 2 of these I have 2 x 6TB drives which store my media plus 2 x 6tb drives which serve as backups all attached to my iMac via 2 of these. If you organise a systematic backup system - this is perfect. Can't recommend it enough.
Pierre
9 februari 2025
Utilisé avec Cobian BackUp, il permet de sauvegarder d'un disque à l'autre à une moyenne de 150mo/s, deux sauvegardes depuis sur HDD de 2to, ...Parfait !Je n'ai pas testé la fonction clone, je n'en ai pas besoin , vu que je passe par le logiciel qui me sauvegarde tout par incrémentation d'un disque sur l'autre...en bref, je sauvegarde sur un disque, et tous les 2 mois, je mets à jour l'autre , au cas où ...
Devoet daniel
1 november 2024
Utilisation simple attention un clonage prends quelques heures

Misschien vind je dit ook leuk