Winkelwagentje

Winkelwagen is nog leeg.

Winkelwagen is nog leeg.
Op voorraad

InLine 36219I temperatuursensor, met kabel, 1 m, zwart, 1 stuk

3,99€ 8,62€
Gratis verzending bij bestellingen boven 25,99€

Over dit item

  • bijv. voor aansluiting op frontpaneel
  • NTC weerstand
  • Temperatuurbereik: -50 °C tot +90 °C
  • Weerstand bij 25 °C: 10KOhm
  • Kabel: 1 m met paalaansluiting, 2-polig


1 meter


Patrik Weirum
8 mei 2025
This product fulfilled my expectations at an affordable price.I actually never needed an extra temperature sensor. Instead, I soldered a switch to the end of it and am using it as an extension for the "reset CMOS" for convenience.
DELETRAZ Maxime
18 april 2025
Sonde utilisée pour prendre la température de mon alimentation dont le ventilateur ne s'allumait que rarement. Immédiatement reconnue par la carte mère. Le fil est assez long pour pouvoir le cacher dans le boitier.Produit satisfaisant.
dalton russell
12 april 2025
lo utilizzo come sensore di temperatura supplementare collegato alla porta 2 pin T_Sensor su scheda madre ASUS (X470 Pro). viene riconosciuto perfettamente da BIOS e software di gestione della scheda madre. il cavo molto lungo (1 m circa) permette di portare il sensore in qualsiasi punto del case per monitorarne la temperatura. il sensore è molto sottile quindi è possibile sleevare il cavo se lo si desidera (io l'ho fatto con paracord 550).la lettura è un po lenta (alcuni secondi di ritardo), non so se dovuto alla scheda madre o al sensore in se. la lettura è comunque molto attendibile.trovo il prezzo un po caro, ma non ci sono molte alternative in giro.
Michael B.
9 februari 2025
Günstiger und guter Temperatursensor, funktioniert wie er soll an einem Asus TUF Gaming X670E Plus
dodger
1 januari 2025
I wanted to get a 10 year old Coolermaster Musketeer (contains fan speed/Temp/VU meter) up and running on a retro style PC. All worked except the temperature sensor. At £10+ on most sites I wasn't going to bother, until I found this. At £2.54 it was worth a punt.This has a flat plug, but I found it actually fitted the 3 pin fan type male connection on the Musketeer. NOTE, care has to be taken to make sure you push it over the correct pins. Now all working fine, temp readout agrees with BIOS temps.Only (small) negative is that it took a couple of weeks to arrive.