Laboratoriumvoeding DC-voeding variabel, 0-32V 0-10A instelbare schakeling DC-geregelde bankvoeding met USB en Type-C snelladen, encoderknop, uitgang aan/uit-schakelaar,4-cijferig LED-display Jesverty

I was initially considering an alternative power supply with four memory buttons, but that model lacked USB ports. As a result, I chose this one instead.Pros:* Aluminum housing: Durable and gives a premium feel.* Compact design: Fits easily on a desktop without taking up much space.* Intuitive knobs: The coarse and fine knobs for voltage and current adjustments are excellent. Each step is tactile, making precise adjustments easy.* Quiet operation: The fan remains off under light use and only activates when cooling is necessary.* Versatile USB ports: Both USB-A and USB-C outlets are included, making it ideal for powering Arduino projects and other devices.* Flexible power terminals: The combination of a banana jack and a screw mechanism allows you to either plug in test leads or secure a wire by tightening it.Minor Cons:* Button quality: The OCP and OUT push buttons feel slightly wobbly.* Lack of memory buttons: While not a major issue, it would be great to have memory buttons for storing settings in future models.

Werkt prima voor waar ik het voor gebruik. Het enige wat ik niet snap is dat ik bij electrolyse de waardes niet kan vastzetten op 12v 5A....dat is vervelend.

This power delivers the power as advertised. It will produce the current with compromise, and the overcurrent protect and constant current setting work great. I have always been leery of power supply specs as many times they don't deliver. This power supply delivers! READ the instruction manual and there won't be the complaints I see in the low star reviews. The output voltage is right on with my meter and scope so that is great that I can trust what I am seeing on the display. I inadvertently shorted it out a couple of times and it shut down so fast there was next to no spark reaching the 10Amp shutdown. The unit is physically smaller than you might envision from the picture but it fits the bench well and the size doesn't limit the performance. There is a cooling fan that operates much like a CPU fan and is constantly variable depending on load, under light loads 2A or less I don't notice it coming on. The output is quite clean, a bit of ripple around 10mV (reading on scope set at AC input) but that has no effect on circuits I am using it for since they normally have an input power capacitor anyway that smooths out any ripple. One of the best power supplies for the money and I would stack it up against units costing 4 times more. If I had to make a complaint about something I would say the adjustment knob is a little on the cheap side but I plan to change that and the power leads they supply are light duty, not knowing they supplied any I purchased a good set at the same time. And if that is all I can complain about, then it is negligible. The display is nice and bright (also dimmable) and the screen came with a plastic film to protect it during shipping, some complain about scratches and no protective film, perhaps they received previous returns units from those not understanding how the supply works and returning them, again read the instructions! There is also a video explaining the unit so you can see what it does before you buy. Totally pleased and plan to but another one or two to outfit my bench.

gracias

I am not an expert in electronics but for my use this is an excellent bench power supply, well made with a good range of features and as far as I can tell using a reasonable quality meter, the output appears to be accurately reflected in the display.So far I have used it to de-sulphonate and charge a deeply discharged 12v lead acid battery, power an outdoor G Gauge Playmobil railway, power a home made hot wire rope cutter and hot wire UPVC board bender, check small electric motors etcI was original looking for a 5 amp power supply so that I could not accidentally over-drive anything but realised that you can limit this 10 amp unit to (for instance) 5 amps within the setting menu which limits the output up to the setting set in the menu, so you cannot accidentally exceed the ampage required, but can still use the full 10am output when needed by going back to the settings menuOverall an excellent addition to my workshop which I can thoroughly recommend

Fairly rugged , metal enclosure, weighs enough to sit firmly on its rubber feet. Very nice front panel layout with sensibly spaced easy to use controls and relatively large & bright display that is easier to read from a further distance than many others. Output enable /disable button is an especially valuable feature and all buttons and controls seem to be of decent quality and work well, also they seem very intuitive to use, so it doesn't require a huge user manual but the one thats included does pretty well at explaining operation, although the manual included with mine does not explain the very useful OPN mode feature but fortunately that is briefly explained in the advertisement on Amazon. Only one other feature i've noticed isn't clearly explained in manual or on outside of packaging is the voltage range does n fact go up to 32V (at least on the one i received) just like advertised on Amazon but despite the "30" volt limit printed on the box or in the manual. Otherwise i like this supply very much and probably will buy another one, also i'll recommend it to others.

De media kon niet worden geladen.