STAEDTLER 502 BK A6 Mars Rotary Action Lead Pointer en Tub voor 2mm Leads, 502BKA6

Works very well.

De media kon niet worden geladen.

Excellent

A very neat little gimzo that works great once you get the hang of it. Staedtler does not do a good job of putting instructions with their products -- perhaps this is because they make professional drafting gear and assume everyone already knows how to use their tools.However, it's easy to figure out. You release the lead into the little holes that match the angle of the tip you want (sharp for lines/writing, broad for drawing/shading), I assume these are traditional 23° and 30° tips. Then, you feed the pencil into the large hole, making sure the lead has threaded through the internal chute. Then you gently grip the pencil with two fingers and use it as a crank (like a ice cream maker or a kitchen mill) to engage the sharpening burr. Once you no longer feel the lead scraping the grinder, your lead is done.It is important to know that this is designed to fit the German Staedtler 780 and 788 Leadholders. Or, rather, it's a traditional design and as such they designed those pencils to be compatible -- these are designs from probably 50+ years ago, so it's hard to know which came first. That said, I imagine it is more-or-less compatible with most traditional slim leadholders.Regarding German/Japanese pencil compatibility: One of the things that has come up in the comments on this product as well as many of the Japanese Staedtler products is that this Staedtler 502 Lead Pointer is not compatible with anything wider than the 780 and that includes being "incompatible" with the popular Japanese 925 25-20 and 925 35-20... you will see that many people discuss how to sharpen those in the reviews. First, I will say, there are many stand-alone 2mm sharpeners. If you really want a standalone sharpener, the Staedtler "egg" or "oval"-shaped sharpener from Japan (513 85DS BK), which fits 2mm and 3mm leadsHowever, I can tell you, as I literally just used this 502 sharpener to sharpen my 925 25-20. The simple solution is to make the lead flush with the sleeve, then click the pencil 16-20 times, and then thread the pencil into the grinder, and go for it. You will have to experiment on the angle, the longer the lead the sharper the tip. Start at 16 and work to 20 clicks. If it is too long you will likely snap your lead. I can confirm that this works with HB leads; different degrees may have different results. If you want to be 100% certain, then buy a cheap 780 and use it as a sharpening body, or buy the egg sharpener.

منتج ممتاز جدا