Winkelwagentje

Winkelwagen is nog leeg.

Winkelwagen is nog leeg.
Op voorraad

TKOOFN GoPro Camera Fiets Motorfiets Monteren, 360 Graden Draaibaar Verstelbaar Universele Metalen Fietssteun Houder Stuurhouder voor GoPro Hero 7/6/5/4/3+/3/2 Sessie, Ca-non Ni-kon S-ony Actiecamera

9,99€ 19,99€
Gratis verzending bij bestellingen boven 25,99€

Productdetails

  • 【2 IN 1 ONTWERP】- Deze fietssteun is niet alleen voor GoPro action camera's, je kunt hem ook gebruiken met een normale camera met standaard draaibare 1/4 adapter aan de onderkant. Het is compatibel met alle GoPro en GoPro-achtige actiecamera's, zoals GoPro Hero 4 5 6, Campark ACT74, AKASO EK7000 EK5000, Garmin Virb, SJCAM, Xiaomi Yi 4K camera etc.
  • 【360 GRADEN DRAAIBAAR】- Met twee 360 graden draaibare bollen op de houder, kan je camera vrij worden aangepast aan elke hoek om je een duidelijke en stabiele opname-ervaring te bieden. ★★ Zorg ervoor dat de schroef van de knipcamera is vastgedraaid, anders kan de camera worden gestoten om eraf te vallen tijdens het fietsen of motorrijden.
  • 【DUURZAAM & HOGE KWALITEIT】- Deze actiecamerahouder is gemaakt van aluminiumlegering en is sterker dan andere plastic houders, stevig en duurzaam. Je bent niet bang dat de houder zal vallen of vallen tijdens snelle bewegingen of plotseling remmen.
  • 【ANTI-SHAKE & ANTI-SKID】- Deze Gopro-fietshouder wordt met zeskantschroeven aan het stuur bevestigd. Zorg ervoor dat u uw actiecamera en fietssteun in de juiste richting monteert waar deze geen verhoogd deel heeft, zodat de fietssteun uw camera kan vergrendelen en niet zal schudden.
  • 【MAKKELIJK TE INSTALLEREN】- De motorcamerahouder met bijgeleverde tool is eenvoudig te monteren. 2 schroeven zijn voor het bevestigen van de houder op je stuur en 1 schroef is voor het aanpassen van de hoek. Het kan worden bevestigd aan het stuur of ronde buis met een diameter van 19~33mm, zoals zadelpen, fietssturen, fitnessapparatuur, skistokken en meer.


Productbeschrijving


jhj

34422

Stabiel en duurzaam

Gemaakt van hoogwaardig ABS-materiaal, lichtgewicht maar sterk, heeft het nieuwste geavanceerde ontwerp om schokken te verminderen om de stabiliteit te verhogen en de kwaliteit van uw opnamen tijdens het rijden te garanderen.

trert

Meer schieten hoeken

Met twee 360 graden draaibare ballen op de houder voor uw opnamen vanuit elke hoek, voldoet u aan uw allround opnamebehoeften.

rere

Eenvoudige installatie

De motorcamera is eenvoudig te installeren met het meegeleverde gereedschap.

eqwqq

Aandacht:

1. Zorg ervoor dat de schroef van het knippen camera is vastgedraaid, anders kan de camera worden gestoten om af te vallen wanneer u fietsen of motorrijden.

2. Zorg er vriendelijk voor dat u uw actiecamera en fietsbevestiging vanuit de juiste richting monteert waar het geen verhoogd deel heeft, zodat de fietshouder uw camera kan vergrendelen en niet zal schudden.

sfde

Specificaties:

Materiaal: Aluminiumlegering en roestvrij staal

Functie: 360 graden draaibaar

Geschikt voor stuurmaten in diameter: 19 ~ 33 mm

Compatibiliteit: Gopro alle sessie en Gopro-achtige actiecamera"s. Zoals Campark ACT74, AKASO EK7000 EK5000, YI 4K actiecamera en andere normale camera met de onderkant die kan worden bevestigd.


Piet
2 juni 2025
The bolt for the screw that holds the camera is not fixed in place, so its easy for it to pop out and be lost. Its mostly metal, which is good, but the clamping part is probably longer than it needs to be. Kind of falls apart when you take the camera mount off the rest of the unit, but in the end it does what its supposed to do without putting your camera at serious risk.
Hamradio
6 mei 2025
Over pat years i buy 7 of these. The first versions the round knops have some profile on i, preventing get loss. This version the knopt have no profile.
Guido Meulendijks
4 mei 2025
One would expect it to be compatible with RAM and it isn't.The balls are not 1" (25mm) and they are not made of rubber. If your device can be harmed by shock, this appliance does nothing for shock absorbing. The reason I bought this was the need for the RAM mount middle piece... I found another use for it , the only reason I kept it
Gert Idema
19 maart 2025
Stevig product, makkelijk te installeren. Makkelijk in allerlei hoeken te zetten.
Adrian Newby
13 maart 2025
I got this to hold my GoPro steady when cycling on poorly-maintained roads surfaces. Other arms have all drooped as you go over bumpy sections, no matter how hard you tighten them.The design here is really effective. It's a double-ball joint, allowing you to position the camera exactly where you want it. Then, tightening the screw pinches the arm around both balls to hold everything in place. The balls themselves have roughened surfaces to improve holding.Having said that, there are still a couple of things to be aware of:1. When going from a warm garage to a cold outside, the metal may expand slightly, loosening the overall grip, so be prepared for a little extra tightening once the metal has cooled to ambient temperature.2. On very bumpy surfaces, the arm can still be knocked out of position, no matter how tight you screw things down. Rather than risk stripping the nut by over-tightening, I was able to prevent movement by positioning the arm at the bottom of its range of travel e.g. low, flat and forward, instead of pointing up to the sky.
Roberto
8 maart 2025
Perfetta..montata su moto..nessun problema riscontrato..contento
Manfred S.
14 februari 2025
Günstig und trotzdem haltbar. Ich verwende die seit einem Jahr am Motorrad und immernoch alles bestens.
nono
5 januari 2025
Vendeur top réactif marchandise conforme
Victor
23 november 2024
Tal y como describe, muy robusto y graduable, lo usamos en el kart y ha sido muy fácil acoplar.