Winkelwagentje

Winkelwagen is nog leeg.

Winkelwagen is nog leeg.
Op voorraad
5/5
2 Recensies

Waveshare ESP32-C6 Microcontroller, WiFi 6 Development Board, 160MHz Single-core Processor, ESP32-C6-WROOM-1-NX Series Module, Supports USB and UART Development,16MB Flash, with Pinheader

6,99€ 16,99€
Gratis verzending bij bestellingen boven 25,99€
  • Powerful and Compact Design: This entry-level RISC-V microcontroller development board integrates WiFi 6, Bluetooth 5, and IEEE 802.15.4 (Zigbee 3.0 and Thread), offering a compact yet powerful solution for various applications such as smart homes, industrial automation, healthcare, and consumer electronics.
  • High-Performance ESP32-C6-WROOM-1-NX Module: Equipped with a RISC-V 32-bit single-core processor running at up to 160MHz, this board features a built-in 8MB/16MB Flash, ensuring robust performance for a wide range of projects and applications.
  • Multiple Peripheral Interfaces and USB Support: The development board integrates SPI, UART, I2C, I2S, LED PWM, SDIO, and other interfaces. It also includes onboard CH343 and CH334 USB HUB chips, allowing simultaneous USB and UART development via a USB-C port for enhanced flexibility.
  • Easy Integration and Expansion: The board is compatible with the pinout of the ESP32-C6-DevKitC-1 development board, offering seamless integration and expansion with additional peripheral modules, making it convenient for developers to scale their projects.
  • Comprehensive Development Support: With online examples and tutorials for the ESP-IDF development environment, this board is designed to help you quickly get started and implement your ideas in real-world products. Rich WiKi Resources: We provide official Wiki resources, please visit our store and click the wiki page to get resources.



Oliver
13 mei 2025
Geliefert wird ein ESP32-C6-WROOM-1-N16 mit vorverlöteten Pin Headern. Das Board stellt WLAN und BLE 5 zur Verfügung und eine RGB LED direkt neben dem USB-C Anschluss. Die Inbetriebnahme ist problemlos, das Development Board funktioniert in der Arduino IDE nach Auswahl des “ESP32C6 Dev Board” out of the box. Der Preis ist hier leider ziemlich hoch, dafür bekommt man regulär fast zwei dieser Boards.
Technikus Grandus
21 november 2024
Der ESP wurde direkt in das Smart Home integriert. Funktioniert in der Arduino IDE als "ESP32C6 Dev Board", lässt sich problemlos flashen und verwenden. Lese damit BME280 Sensoren aus und schicke die Daten per WLAN/MQTT weiter.Das Board reagiert sehr schnell bei Web-Requests, bislang immer zuverlässig und ohne Verbindungsabbrüche.Lötstellen sehen sauber aus. Alle Pins waren gerade.

Misschien vind je dit ook leuk