Winkelwagentje

Winkelwagen is nog leeg.

Winkelwagen is nog leeg.
Op voorraad

Bächlein universele dubbele buitenkraan voor de tuin [blauw] incl. 2 slangaansluitingen - edele dubbele waterkraan met 1/2 en 3/4 inch aansluiting, dubbele kogelafvoerkraan

7,99€ 17,95€
Gratis verzending bij bestellingen boven 25,99€

Over dit item

  • UNIVERSELE INSTALLATIEGROOTTE - Dankzij de meegeleverde schroefdraadadapter past de kraan op zowel ½ inch- als ¾ inch-aansluitingen. Dit betekent dat uw nieuwe uitloop klaar is voor gebruik in de tuin!
  • EENVOUDIGE INSTALLATIE - De PTFE-tape zorgt voor een betrouwbare afdichting en maakt de installatie voor u eenvoudiger. Geen vertragingen bij de montage. U ontvangt een complete set incl. alle accessoires!
  • GRATIS SLANGVERBINDING - Naast de voorgemonteerde slangaansluiting wordt de kogelkraan geleverd met een extra aansluiting voor alle snelkoppelingen. Geschikt voor alle gangbare modellen!
  • ALLEEN GEPROEFTE MATERIALEN - Voor de uitlaatkraan wordt het beste CW617N messing gebruikt. In combinatie met een vernikkeld oppervlak en precies passende afdichtingen hebben corrosie en vorst geen schijn van kans!
  • BÄCHLEIN-BELOFTE - Omdat wij 100% vertrouwen op onze kwaliteit, willen wij u een absoluut risicoloze bestelling aanbieden: als u niet volledig tevreden bent met uw aankoop, krijgt u uw geld terug!



Productbeschrijving

Kraan

Bachlein dubbele kraan voor de tuin

Bachlein Universele dubbele kraan voor de tuin, blauw, inclusief 2 slangaansluitingen: elegante kogelkraan met 1/2 en 3/4 inch aansluiting, kraan buiten

Verkrijgbaar in 3 kleuren:

- buiklinnen blauw

- antraciet

- tuingroen

Keramische cartridge

Universele inbouwmaat

Dankzij de meegeleverde schroefdraadadapter past de kraan zowel op ½ inch als ¾ inch aansluitingen. Daarmee is je nieuwe kraan klaar voor gebruik in de tuin

Aansluiting vaatwasser

Inclusief slangaansluiting

Naast de reeds voorgemonteerde slangaansluiting wordt bij de kogelkraan een andere aansluiting voor alle snelkoppelingen meegeleverd. Geschikt voor alle gangbare modellen

Badkraan

Zeer eenvoudige montage

De PTFE-tape zorgt voor betrouwbaar afdichten en vergemakkelijkt de installatie. Geen montagevertraging. Je ontvangt een complete set inclusief alle accessoires

terugslagklep

Geteste materialen

Voor de kraan wordt uitsluitend het beste CW617N messing gebruikt. Gecombineerd met een vernikkeld oppervlak en precies passende afdichtingen hebben corrosie en vorst geen kans

Bakklein

Bachlein tevredenheidsbelofte

Als Frans familiebedrijf is klanttevredenheid onze grootste lof. Als je niet 100% tevreden bent met ons product, zijn wij altijd graag voor je klaar!


stefan
1 juli 2025
Goed product 👍🏼
Hofmann
7 april 2025
Praktisches Teil, sehr gute Qualität.
jr
30 maart 2025
Easy to install and very good quality material
Frank H
24 januari 2025
Really nicely made tap, and fitted/lined up without issue. Would have been great if it had been supplied with the requisite fitting washer but hey ho, I have a box of them so not a big deal for me but... Worth noting, as a new one will be needed.Tap operates very well and the quarter turn operations make it very efficient. I particularly like the "plasticoated" lever handle; nice touch (literally).Important thing to note is that this tap does not have a non-return valve, so shouldn't be fitted to domestic mains water "as is" (UK law/regs require a valve).I overcame this by using the valve from my old tap, but it required some fettling... Old tap had a small step in the bore to stop/hold the plastic valve in place. This new tap is a straight bore, so just putting the valve in means it would have been flushed along the tap causing obstruction to the underside outlet.You can get separate valve fittings to go between the tap and the supply, but I didn't want to have the tap sticking out that extra amount. So...My solution which may be of use to others:1. Remove old valve and check it will fit snugly into new tap; 15mm diameter.2. Cut a piece of standard 15mm copper plumbing pipe to inside length of new tap barrel, minus length of valve. For me this was 42mm and guess would be the same for others*.3. Drill or cut a 10mm (or thereabouts) hole through one side, centred at about 12mm from one end. This will allow flow through the lower outlet.4. Drop the tube into the tap with the side hole end in first, and have the hole aligned to the lower outlet (take the lower outlet "spout" off to see up inside and check it's lined up).5. Insert valve and push home.6. Fit tap as normal.7. Have cake (this is vital).* Double check measurements for your valve as I don't know how universal they are, but imagine will be the same.Hope that helps at least one fellow irrigator 🙏🏻
Carlos González
7 december 2024
Por fin un grifo con las partes móviles de acero inoxidable y de buena calidad, ya no tengo que preocuparme de que se oxide como el otro que tenía.
sally007
5 november 2024
Top Qualität 👌🏻