Winkelwagentje

Winkelwagen is nog leeg.

Winkelwagen is nog leeg.
Op voorraad

Houtbewerkingsschaaf, Ebbenhout Mini-kabellijn Houtbewerkingsvliegtuig Timmerman Houtsnijgereedschap Handmatige Schaafmachine Houten Snijmachine Timmerman Handschaafmachine 75 X20 X 13 Mm

11,99€ 22,23€
Gratis verzending bij bestellingen boven 25,99€

Productdetails

  • 【Hoe te gebruiken】Tijdens het gebruik moet de schaafmachine met beide handen worden genivelleerd, vooral bij het schaven naar het einde van het hout, moeten beide handen de schaaf vasthouden en uittekenen volgens de originele horizontale lijn, om het einde van het hout door aan de kop te trekken.
  • 【Zal jezelf geen pijn doen】 Het mes is in principe volledig in mahonie gewikkeld, ongeacht in welke hoek je kracht uitoefent, je zult jezelf geen pijn doen.
  • 【Vóór het schaven】Bekijk voor het schaven eerst de convexe en concave delen en de omvang van het te schaven houtoppervlak met ogen, plan vervolgens het uitstekende deel om het ongeveer vlak te maken en plan het vervolgens langs de schaaflijn.
  • 【Krachthouding】De houding tijdens het schaven moet zijn dat het linkerbeen als een boog naar voren buigt en het rechterbeen recht naar achteren wordt gestrekt en hard op de grond drukt om de reactiekracht van het schaven te ondersteunen. Wanneer u de schaafmachine met beide handen naar voren duwt, moeten beide schouders en armen tegelijkertijd worden gefocust, niet alleen de polsen, zodat de verloren schaafmachine sterk zal zijn.
  • 【Operationele opmerking】Bij het duwen en schaven moeten beide armen recht en sterk zijn. Hoe hard het hout ook is, duw tot het einde zonder traagheid en zachtheid.


Productbeschrijving

Specificatie:
Staat: 100% Nieuw!
Model: k01053-055-C
Materiaal: hogesnelheidsstaal + ebbenhout
Gewicht: Ca. 49g / 1.7oz
Vliegtuig Breedte: Ca. 13 mm / 0,5 inch
Lengte: Ca. 75 mm / 3,0 inch
Dikte: Ca. 20 mm / 0,8 inch
Vliegtuig Lengte: Ca. 60 mm / 2,4 inch

Pakket Lijst:
1 * Houtbewerkingsvliegtuig


Customer
16 november 2024
This plane arrived in a little cardboard box which was pretty badly beaten up, thankfully the plane inside hadn’t suffered any damage as a result but a bit more packaging would’ve been nice.Take careful note of the dimensions in the product title as they’re accurate and this is a very small plane intended for smaller locations and use-cases. It’s easy enough to chuck into a toolbox or tool belt pocket to have on hand when you need to touch up something minor like a door. It's also great for knocking the sharp edge off or fully chamfering a piece of lumber.It works to a usable level right out of the box, but if you have the time and patience, I'd really suggest giving the blade a quick touch up with some stones. My only other concern is the price point, you can grab these little planes from the likes of Silverline for around a fiver, so the £18 price point here is hard to swallow even if it is made from actual ebony. The fit and finish of the product doesn’t really match my expectations with the price either but it is a tool at the end of the day so I don't particularly care about the looks. The important bit is that the blade sits at the correct angle, the thumbscrew holds it tight and the bottom of the wooden body is very flat. Which is to say it does the intended job well enough after a little time on the sharpening stones.If you don't mind the higher than average cost, this may be worth considering, but there are cheaper ones out there that are basically the exact same.